Hilti KB3 Manual

Hilti Ikke kategoriseret KB3

Læs nedenfor 📖 manual på dansk for Hilti KB3 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 36 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2

2060284-03.2023

KB3 HDG /

KB3 SS304 / SS316

Anchor Diameter [inch]

Symbol Symbol Description Units ¼ ½ ¾ 1⅜ ⅝

HDB Hollow Drill Bit –– – –✔✔✔

DRS Dust Removal Systems –✔ ✔ ✔ ✔ ✔ –

AT-System

SIW 6AT-A22 + SI AT-A22 –– – –✔ ✔ ✔

SIW 4AT-22 + SI-AT-22 –– – –✔ ✔ ✔

SIW 6AT-22 + SI-AT-22 –– – –✔✔✔

d0 Drill Bit Diameter [inch] ¼ ½ ¾ 1⅜ ⅝

h0*** Minimum Hole Depth in Base Material [inch] 2 4 52 ⅝ 2 ⅝ 3 ⅞ 4¾ 4½ 5¾ 6¾

hnom Nominal Embedment Depth [inch] 1¾ 2 ⅜ 2 ¼ 3 ⅝ 3½ 4 ¼4⅜ 5⅝ 4⅝ 6 ⅜

hef Effective Embedment Depth [inch] 1½ 2 2 4 5 43¼ 3 ⅛ 3 ¾ 5¾

Tinst, concrete Installation Torque Concrete [ft-lb] 4 20 40 60 110 150

Tinst, grout lled CMU Installation Torque Grout-Filled CMU [ft-lb] 4 15 25 65 120 –

dx Fixture Hole Diameter [inch] ⁵⁄₁₆ ⁷⁄₁₆ ⁹⁄₁₆ ¹³⁄₁₆¹¹⁄₁₆ 1⅛

WS Wrench Size [inch] ⁷⁄₁₆ ⁹⁄₁₆ ¹⁵⁄₁₆¾1⅛ 1½

Use only carbide-tipped masonry drill bits complying with ANSI B212.15.1994

** AT-System not applicable for grout-lled CMU and wood fastening applications. AT system not applicable to be used with HDG anchors.

*** For a non-hole cleaning installation (step 1a or 1b), make sure to drill deep enough to achieve h0, taking into account the depth of debris remaining in the hole

nom dfix Tinst

hef

90°

TE-CD

TE-YD

90°

d0Tinst

AT-System**

1a 1c

3a 3b