Hizero Bionic F500 Manual

Hizero Damprenser Bionic F500

Læs gratis den danske manual til Hizero Bionic F500 (14 sider) i kategorien Damprenser. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Hizero Bionic F500, eller vil du spørge andre brugere om produktet?

Side 1/14
Series
EN
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING (THIS APPLIANCE)
When using an electrical appliance, basic precautions should always be followed, including the following:
WARNING-To reduce the risk of fire, electric shock, or injury:
a) To Reduce the Risk of Fire due to internal component damage, use only HIZERO cleaning fluid intended for use with the appliance. See the
Cleaning Fluid section of this manual. To Reduce the Risk of Fire, do not use a flammable or combustible liquid to clean a floor.
b) For household use only. Do not use outdoors.
c) Do not allow to be used as a toy. Close attention is necessary when used by or near children.
d) Use only as described in this manual. Use only manufacturer’s recommended attachments.
e) Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into
w er, turn it to service center.at re
f) Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over
cord. Keep cord away from heated surfaces.
g) Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
h) Do not handle plug or appliance with wet hands.
i) Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
j) Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
k) Turn off all controls before unplugging.
l) Use extra care when cleaning on stairs.
m) Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
n) Prevent unintentional starting. Ensure the switch is in the o-position before connecting to battery pack, picking up or carrying the appliance.
Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
o) Disconnect the battery pack from the appliance before making any adjustments, changing a essories, or storing appliance. Such preventive cc
safety measures reduce the risk of starting the appliance accidentally.
p) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may cr e a risk of fire eat
when used with another battery pack.
q) Use appliances only with specifically design ed battery packs. Use of any other ttery packs may create a risk of injury and fire.at ba
r) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
s) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
t) Do not use a battery pack or appliance that is damaged or modified. Damaged or modified tteries may exhibit unpredictable behavior ba
resulting in fire, explosion or risk of injury.
u) Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
The temperature of 130°C may be replaced by the temperature of 265°F.
v) Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instruc-
tions. Charging improperly or at temperatures outside of the specified range may damage the ttery and increase the risk of fire.ba
w) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is
maintained.
x) Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.
EN
1
4
2. Components in the box
Upper Body x 1
Quick-Mount Screw x 1
Battery x 1(Installed)
Clean Water Tank x 1(Installed)
Lower Body x 1
Dirty Water Tank x 1(Installed)
Cleaning Roller x 1
Brush Roller x 1(installed)
Base Dock x 1
Power Adapter x 1
Cleaning Brush x 1
Brush Cleaner x 1
User Manual x 1
HIZERO Cleaning Solution x 1(Optional)
Trash Container x 1(installed)
H
I
Z
E
R
O
EN
EN
Note: If there is sand or other sharp objects on the floor, do not
move the product with the wheels to avoid possible scratches.
Note: The maximum opening angle of the brush roller motor is about 45°,
please operate with caution.
Note: The maximum opening angle of the cleaning roller motor is
approximately 45°, so please operate with caution.
7. 7 Clean the Dirty Water Tube Filter
When the filter is clogged, wash the filter.
Remove the side cover on the right side (facing the unit) of the
cleaning head from the gap marked with an arrow in the picture
below, and take out the dirty water tube filter to wash it.
Reinstall the filter when it is cleaned.
8.1 Storing
8.2 Moving
1. Before storing, switch off the product, lock the body and place
it onto the base dock.
2. Clean the interior of the cleaning head before storage to
prevent bacteria from breeding.
3. Before storage, please make sure to empty the clean/dirty
water tank.
4. If the product will not be used for more than a week,
disconnect the power adapter, and take out the cleaning roller
to dry it before storing the product.
9.2 Replace the Brush Roller
For better experience and cleaning results, please make sure to use HIZERO
brush rollers. We also recommend that you pay attention to the condition of
the brush rollers.
1. Please switch off and lock the product.
2. Press the cleaning head cover button to open the cleaning head cover.
3. Release the brush roller snap-fit in the direction of the arrow.
4. Remove the old brush roller and insert the new one.
5. Push the brush roller back in and make sure that the snap-fit locks
properly. Close the cleaning head cover.
9.1 Replacing the Cleaning Roller
For better experience and cleaning results, please ensure that you use the
HIZERO cleaning roller. We also recommend that you monitor the
condition of the cleaning roller and replace it if it is torn, broken, chipped,
hardened to ensure cleaning results. We recommend that you replace it
once every 6 months.
1. Please switch off and lock the product.
2. Press the cleaning head lid button to open the cleaning head lid.
3. Release the cleaning roller snap-fit in the direction of the arrow.
4. Remove the old cleaning roller and insert the new one.
5. Push the cleaning roller back in and make sure that the snap-fit
locks properly. Close the cleaning head lid.
1. Make sure the product is switched off and locked in upright position.
2. To move the product, tilt the product backwards to use the back
wheels.
8. Storing & Moving
9. Accessory Replacement
10


Produkt Specifikationer

Mærke: Hizero
Kategori: Damprenser
Model: Bionic F500

Har du brug for hjælp?

Hvis du har brug for hjælp til Hizero Bionic F500 stil et spørgsmål nedenfor, og andre brugere vil svare dig