Power ON/OFF
Safety Precautions and Maintenance
1 Unplug the monitor before cleaning it with a slightly damp cloth.
2 Wiping the screen with a dry cloth is recommendable, and only during the
power has been switched off.
3 Do not use alcohol or ammonia-based liquids.
4 This monitor is designed with ventilation holes on the cabinet back, please
do not cover them or block it.
5 Also avoid placing the monitor near the electric heater or heater, including
in an enclosed room with no ventilations.
6 Please do not insert any matter or spray any liquid on it.
7 Please do not position the monitor on unsafe space, if it falls, it may be
damaged and may hurt the user.
8 Unplug the monitor if it is not going to be in use for an extended period of
time.
9 Please do not put heavy items on the monitor, or electric cord.
10 Please do not open the monitor back panel because the monitor contained
high voltage current.
Contents
•
•
warranty card
•
user manual instruction
Features:
•16.7M high quality image colors
•Smart image screen setting – OSD with simple layout and easy selection
•Smart control interfaces for easy settings
•Auto function; when no settings are set, it will auto-adjust to optimum settings
Basic setup
a) Insert the VGA cable (signal cord) to the PC graphic card (signal input).
b) The monitor has a wide power voltage range; it can be used on AC 100-240
50/60Hz power supply.
c) Connect the power cable to the Monitor power socket and to the power source in
the room.
d) Turn on the power source supply.
e) To switch on the monitor, press the power control on/off key
(first button from the bottom at the rear panel.
Power indicator light
•Blue (green) light indicates the power is on.
•Blue (green) light indicates the signal is
operating normally.
•Blue (green) flash indicates there is no input signal.
VGA connector
DVI connector
AC Adapter
12
11
