Honeywell DreamWeaver HTF400 Manual

Honeywell Ventilator DreamWeaver HTF400

Læs gratis den danske manual til Honeywell DreamWeaver HTF400 (25 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Honeywell DreamWeaver HTF400, eller vil du spørge andre brugere om produktet?

Side 1/25
1
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed to reduce
the risk of fire, electric shock, and injury to persons,
including the following:
1. Use this fan only as described in this manual.
Other use not recommended as it may cause
fire, electric shock, or injury to persons.
2. This product is intended for household
use ONLY and not for commercial, industrial
or outdoor use.
3. To protect against electric shock, DO NOT
place fan in window, immerse unit, DO NOT
plug, or cord in water, and spray DO NOT
unit with liquids.
4. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan and unplug the fan from OFF
the outlet when not in use, when moving the
fan from one location to another, and before
cleaning.
7. To disconnect the fan, first turn the unit OFF,
grip the plug and pull it from the wall outlet.
NEVER pull the plug by the cord.
8. DO NOT operate the fan in the presence
of explosive and/or flammable fumes.
9. DO NOT place the fan or any parts near an
open flame, cooking, or other heating appliance.
10. DO NOT use any product with a damaged
cord or plug, any product that malfunctions,
or any product that has been dropped or
damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended
by the manufacturer may be hazardous.
13. Place the fan on a dry, level surface.
14. DO NOT hang or mount fan on a wall
or ceiling.
15. DO NOT operate if the fan housing
is damaged.
16. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
17. DO NOT run fan cord under carpeting.
DO NOT cover cord with throw rugs, runners,
or similar coverings. route cord DO NOT
under furniture or appliances. Arrange cord
away from traffic areas and where it will not
be a tripping hazard.
18. DO NOT use an extension cord or power
strip with this fan.
WARNING: To reduce the risk of fire or
electric shock, DO NOT use this fan with any
solid-state speed control device, other than
the one supplied.
DreamWeaver Sleep Fan
with Year Round Pink Noise
Sound Blocking
HTF400, HTF440 Series
Owners Manual
HTF400 HTF440
2
This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical
fault occurs. Please see below for more information on how to properly use your fan and replace the safety
plug fuse, if needed.
FUSED SAFETY PLUG - FOR US MODELS ONLY
INTRODUCTION
USER SERVICING INSTRUCTIONS
If your fan loses power and you suspect that the fuse on your fan has blown,
grasp plug and remove from the receptacle or other outlet device. DO NOT
unplug by pulling on cord.
Slide fuse cover, located on the top of the plug, towards the prongs of the plug.
(Fig. 1)
Carefully remove the blown fuse and snap a new fuse into place. To reduce the
risk of fire, replace fuse only with 2.5 Amp, 125 volt fuse. Fully close the fuse
door by sliding back into place. (Fig. 2) Discard the blown fuse. The plug should
now be ready for normal use.
To Reduce the Risk of Fire, DO NOT replace attached plug. The plug
contains a safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.
If you need further information on how or when to replace the fuse in the
safety plug, please contact our Consumer Relations department at
1-800-477-0457. You may also visit our website at:
www.HoneywellPluggedIn.com.
Helping to create your optimal sleep environment year-round
The DreamWeaver™ Sleep Fan empowers you to design a relaxing, comfortable sleep environment to help
promote a more restorative night’s sleep. Quick tap controls make it easy to change the powerful fan speed
settings even in the dark. Enjoy the pink noise sound blocking benefits year-round with or without a
cooling airflow!
Fig. 1
Fig. 2
WARNING: Chemical Burn Hazard.
Keep batteries away from children. This product contains a lithium button/coin cell battery.
If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause
severe internal burns and can lead to death in as little as 2 hours. completely secure ALWAYS
the battery compartment. If the battery compartment does not close securely, stop using the
product, remove the batteries, and keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek immediate medical attention. The
cells shall be disposed of properly, including keeping them away from children; and even used
cells may cause injury.
HTF440 SERIES ONLY


Produkt Specifikationer

Mærke: Honeywell
Kategori: Ventilator
Model: DreamWeaver HTF400

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell DreamWeaver HTF400 stil et spørgsmål nedenfor, og andre brugere vil svare dig