Honeywell HSF1640 Manual

Honeywell Ventilator HSF1640

Læs gratis den danske manual til Honeywell HSF1640 (12 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Honeywell HSF1640, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
IMPORTANT
SAFETY INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical appliances,
basic precautions should always
be followed to reduce the risk of
persons, including the following:
FOR US MODELS ONLY - This product
employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse
as per the user servicing instructions (follow
product marking for proper fuse rating)
and check the product. If the replacement
fuse blows, a short-circuit may be present
and the product should be discarded or
returned to an authorized service facility
for examination and/or repair.
1. Use this fan only as described in this
manual. Other use not recommended
as it may cause fire, electric shock or injury
to persons.
2. This product is intended for household
use  ONLY and not for commercial,
industrial or outdoor use.
3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4. This appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of shock, this plug is
intended to fit only one way in a polarized
outlet. If the plug does not fit fully in
the outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician. DO NOT attempt to
defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan and unplug the fan from OFF
the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall
outlet. Never pull the plug by the cord.
8. DO NOT operate the fan in the presence
of explosive and/or flammable fumes.
9. DO NOT place the fan or any parts
near an open flame, cooking or other
heating appliance.
10. DO NOT operate the fan with a damaged
cord or plug or if the product malfunctions,
is dropped or damaged in any manner
(see warranty).
11. DO NOT use an extension cord or power strip
with this fan.
12. Avoid contact with moving fan parts.
13. The use of attachments not recommended
by the manufacturer may be hazardous.
DOUBLE BLADE
WHOLE ROOM STAND FAN
HSF1640 Series
2
BASE ASSEMBLY
1. Align the pole in the base using tabs as a guide.
2. Gently place base on its side. (Fig. 3)
3. Insert and tighten the L shaped bolt and washer
on the bottom of the fan base. (Fig. 4)
4. Tighten by turning clockwise.
14. Place the fan on a dry level surface.
15. DO NOT hang or mount fan on a wall
or ceiling.
16. DO NOT operate if the fan housing
is damaged.
17. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
18.
DO NOT
operate any fan with a damaged
cord or plug. Discard any damaged fan,
return the fan to the retailer where the
fan was purchased, or request a return
authorization to return to Kaz, Inc. for
examination and/or repair.
19.
DO NOT
run fan cord under carpeting.
DO
NOT
cover cord with throw rugs, runners, or
similar coverings.
DO NOT
route cord under
furniture or appliances. Arrange cord away
from traffic areas and where it will not be
tripped over.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With Any
Solid State Speed Conrol Device.
FUSED SAFETY PLUG - FOR US MODELS ONLY
USER SERVICING INSTRUCTIONS
• If your fan loses power and you suspect that the fuse on your fan has blown,
grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
• Slide fuse cover, located on the top of the plug towards the prongs of the plug.
(Fig. 1)
• Carefully remove the blown fuse and snap a new fuse into place. To Reduce
the Risk of Fire, replace fuse only with 2.5 Amp, 125 volt fuse. Fully close the
fuse door by sliding back into place. (Fig. 2) Discard the blown fuse. The plug
should now be ready for normal use.
• To Reduce the Risk of Fire, do not replace attachment plug. Contains a
safety device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
• If you need further information on how or when to replace the fuse in the
safety plug, please contact Kaz Consumer Relations Department by visiting
our website at www.honeywellpluggedin.com/fans
or calling 1-800-477-0457.
This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical fault
occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse,
if needed.
Fig. 1
Fig. 2
Fig. 3 Fig. 4

Produkt Specifikationer

Mærke: Honeywell
Kategori: Ventilator
Model: HSF1640

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell HSF1640 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ventilator Honeywell Manualer

Honeywell

Honeywell 51912 Manual

20 August 2025
Honeywell

Honeywell 51627 Manual

19 August 2025
Honeywell

Honeywell HTF090 Manual

14 August 2025
Honeywell

Honeywell HTF400E4 Manual

14 August 2025
Honeywell

Honeywell HSF1640 Manual

14 August 2025
Honeywell

Honeywell Springhill 50184 Manual

13 August 2025
Honeywell

Honeywell Birnham 50191 Manual

12 August 2025
Honeywell

Honeywell QuietSet HY-108 Manual

12 August 2025
Honeywell

Honeywell HYF023 Manual

12 August 2025
Honeywell

Honeywell HYF013 Manual

12 August 2025

Ventilator Manualer

Nyeste Ventilator Manualer

BEKO

BEKO EFW 5300 B Manual

8 Oktober 2025
Imarflex

Imarflex IF-634DR Manual

7 Oktober 2025
Imarflex

Imarflex IF-630M Manual

7 Oktober 2025
Lian Li

Lian Li L-Wireless Controller Manual

7 Oktober 2025
Lian Li

Lian Li UNI FAN AL120 V2 Manual

7 Oktober 2025
Hisense

Hisense HCF599SW Manual

7 Oktober 2025
Hisense

Hisense HCF349SW Manual

7 Oktober 2025
Hisense

Hisense HCF1699DW Manual

7 Oktober 2025
Kunft

Kunft KSF 2374 Manual

7 Oktober 2025
Kunft

Kunft KDF2375 Manual

6 Oktober 2025