Hooker 1610-75410-GRY Manual

Hooker Stol 1610-75410-GRY

Læs gratis den danske manual til Hooker 1610-75410-GRY (2 sider) i kategorien Stol. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Hooker 1610-75410-GRY, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1/2$

ASSEMBLY INSTRUCTION

Item#:1610 75410- - GRY Upholstered Back Side Chair

** Please make sure you have all parts indicated below prior to assembly.

Assembly Steps:

There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair

during assembly.

1. Place chair back (G) on a clean surface.

2. T ighten seat frame (I) to chair back (G) by using bolt ), lock washer (B) and flat washer (A) at the (C

center location. (see diagram 2) Then tighten seat frame (I) to chair back (G) by using bolts (C),

lock washers (B), flat washers (A). (See diagram 1)

3. Assemble front legs (F) with front corner blocks of seat frame (I), using 4 bolts (C), 4 lock washers

(B) and 4 flat washers (A). Tighten all bolts by hand. (See diagram 2)

4. After all bolts are attached and hand tightened, turn the chair upright.

5. Level the chair following the “chair leveling instruction” as below.

6. Make sure the chair is level and then tighten all bolts completely by using allen wrench . (D)

Diagram 2

Diagram 1

2/2

PLEASE READ THESE INSTRUCTIONS PRIOR TO ASSEMBLING THE

CHAIRS

CHAIR LEVELING INSTRUCTION SUPPLEMENT

Chair leveling procedures:

To make the assembly process easy and efficient, please read the entire instruction sheet prior to

assembling listed is included. To properly assemble the chair, none of the chair. Make sure all hardware

the bolts should be fully tightened until all components are attached to the chair. This will allow an

opportunity to level the chair and prevent any unnecessary “rocking”.

1. Place the loosely assembled chair on a hard flat surface.

2. Apply gentle downward pressure on the seat. This step eliminates rocking and ensures the chair to

be level.

3. Once the chair is level, tighten all bolts and nuts.

Note:

Most floors have slight irregularities that can affect chair leveling. If your chair is uneven when placed

in its desired location, perform the following steps:

1. Loosen front legs to finger tight.

2. Extend both front legs upward to their fullest length.

3. Gently push downward on the front edge of the seat until all four legs rest on the floor.

4. - Re tighten all bolts and nuts.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.

Polish the finish with soft cloth and an industry recognized furniture polish.

Produkt Specifikationer

Mærke:	Hooker
Kategori:	Stol
Model:	1610-75410-GRY

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 1610-75410-GRY stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stol Hooker Manualer

Hooker 1618-75710-DKW Manual

29 August 2024

Hooker 5820-90019-84 Manual

29 August 2024

Hooker 1595-75310C-WH Manual

29 August 2024

Hooker 5323-75310 Manual

29 August 2024

Hooker 5795-75400-95 Manual

29 August 2024

Hooker 5183-75300 Manual

29 August 2024

Hooker 5990-75410A-LTWD Manual

29 August 2024

Hooker 5447-75710 TOFFEE Manual

29 August 2024

Hooker 5325-75300 Manual

29 August 2024

Hooker 5183-75400 Manual

29 August 2024

Stol Manualer

Nyeste Stol Manualer

Fromm & Starck STAR_CHAIR_10 Manual

15 Oktober 2024

Fromm & Starck STAR_CON_52 Manual

15 Oktober 2024

Fromm & Starck STAR_CHAIR_09 Manual

15 Oktober 2024

Fromm & Starck STAR_CON_50 Manual

15 Oktober 2024

Fromm & Starck STAR_CON_60 Manual

15 Oktober 2024

Uniprodo UNI_SUNBED_10 Manual

15 Oktober 2024

Uniprodo UNI_SC_01 Manual

15 Oktober 2024

Uniprodo UNI_SUNBED_12 Manual

15 Oktober 2024

Uniprodo UNI_SUNBED_02 Manual

15 Oktober 2024

Fromm & Starck STAR_SEAT_09 Manual

15 Oktober 2024