Hooker 5751-75206-95 Manual

Hooker Tabel 5751-75206-95

Læs gratis den danske manual til Hooker 5751-75206-95 (3 sider) i kategorien Tabel. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Hooker 5751-75206-95, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

1/3

ASSEMBLY INSTRUCTION

Item# 1-75206-575 95 Friendship Table

** Please make sure you have all parts indicated below prior to assembly.

This table is heavy and can best be assembled with the help of two or more people.

Diagram 1 Diagram 2 Diagram 3

Note:

1. Leaves cannot be switchable. Follow numbers on leaves and top when assemble

2. Height of this table can be adjusted with or without extension block. (30” and 36” heights)

Assembly steps with extension blocks:

1. Attach extension blocks (H) posts (I),then attach mounting plate (J) to posts with extension to

blocks (H)by using bolts (E), lock washers (C) and at washers (D), tighten all with allen

wrench (A). (See Diagram 1)

2/3

2. posts (I)Attach stretcher (K) to with bolts (F), lock washers (C) and at washers (D),

sure all by allen wrench (See Diagram 2)(A)

3. Place table top (L) upside down on a soft surface to prevent it from being scratched.

Put whole base onto top to make sure all pre-drilled holes are in alignment, well insert

bolts (G), lock washers (C) and at washers (D), tighten bolts by turning with allen

wrench (A) in clockwise direction. (See Diagram 3)

4. Turn table upright.

Assembly steps without extension blocks:

Diagram 4 Diagram 5 Diagram 6

1. Unscrew bolts (E), lock washers (C) and at washers (D) from mounting bridge (J Then ).

remove the extension blocks (H) from the posts (I) directly, (See Diagram 4)

2. mounting plate (J) to posts using bolts (B), lock washers (C) and at Attach by

washers (D), tighten all with allen wrench (A). (See Diagram 5)

3. Place table top (L) upside down on a soft surface to prevent it from being scratched.

Put whole base onto top to make sure all p -drilled holes are in alignment, well insert re

bolts (G), lock washers (C) and at washers (D), tighten bolts by turning with allen

wrench (A) in clockwise direction. (See Diagram 6)

4. Turn table upright.

Instruction for table leaves:

1. There are latches at the bottom of table top, turn o the latches as shown in Diagram 7. ff

2. Pull out table top as the arrow direction shown in Diagram 8.

3. Place table leaves between and push table tops together.

4. Turn on latches. (see Diagram 7)

Produkt Specifikationer

Mærke:	Hooker
Kategori:	Tabel
Model:	5751-75206-95

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 5751-75206-95 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tabel Hooker Manualer

Hooker 1652-75410-MWD Manual

8 Juli 2025

Hooker 5750-75401-LTWD Manual

6 Juli 2025

Hooker 5751-75203T-95 Manual

29 August 2024

Hooker 1618-75007-DKW Manual

29 August 2024

Hooker 864-80-112 Manual

29 August 2024

Hooker 366-75-218 Manual

29 August 2024

Hooker 1600-75001-MWD Manual

29 August 2024

Hooker 5840-75200-80 Manual

29 August 2024

Hooker 5990-75200-LTWD Manual

29 August 2024

Hooker 5805-75200T-85 Manual

29 August 2024

Tabel Manualer

Nyeste Tabel Manualer

30 Juli 2025

29 Juli 2025

29 Juli 2025

29 Juli 2025

Ikea BUSLÄTT 706.011.35 Manual

27 Juli 2025

Ikea VILDGÅS 705.893.98 Manual

27 Juli 2025

Ikea BUSLÄTT 906.011.39 Manual

27 Juli 2025

Ikea NÄSINGE 805.875.82 Manual

27 Juli 2025

Ikea NÄSINGE 205.875.04 Manual

27 Juli 2025

Ikea NÄSINGE 905.875.05 Manual

27 Juli 2025