Hooker 1652-75410-MWD Manual

Hooker Tabel 1652-75410-MWD

Læs gratis den danske manual til Hooker 1652-75410-MWD (2 sider) i kategorien Tabel. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Hooker 1652-75410-MWD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1/2

ASSEMBLY INSTRUCTION

Item#: 1652-75410-MWD Upholstered Side Chair

** Please make sure you have all parts indicated below prior to assembly.

Diagram 2 Diagram 1

Assembly Steps:

There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other

chair during assembly.

1. Place chair back (F) on a clean surface.

2. Tighten seat frame (G) to chair back (F) by using bolt (C), lock washer (B) and flat washer

(A) at the center location. (See diagram 2). Then, tighten the corners of seat frame (G) to

chair back (F) by using 4 bolts (E), 4 lock washers (B) and 4 flat washers (A). (See

diagram 1)

3. Assemble two front legs with front corner blocks of seat frame (G), using 4 bolts (C), 4 lock

washers (B) and 4 flat washers (A). Tighten all bolts by hand. (See diagram 2)

2/2

4. After all bolts are attached and hand tightened, turn the chair upright.

5. Level the chair following the “chair leveling instruction” as below.

6. Make sure the chair is level and then tighten all bolts completely by using the allen wrench

(D).

PLEASE READ THESE INSTRUCTIONS PRIOR TO ASSEMBLING THE CHAIRS

CHAIR LEVELING INSTRUCTION SUPPLEMENT

Chair leveling procedures:

To make the assembly process e entire instruction sheet easy and efficient, please read th

prior to assembling of the chair. Make sure all hardware listed is included. To properly

assemble the chair, none of the bolts should be fully tightened until all components are

attached to the chair. This will allow an opportunity to level the chair and prevent any

unnecessary “rocking”.

1. Place the loosely assembled chair on a hard flat surface.

2. Apply gentle downward pressure on the seat. This step eliminates rocking and

ensures the chair will be level.

3. Once the chair is level, tighten all bolts and nuts.

Note:

Most floors have slight irregularities that can affect chair leveling. If your chair is

uneven when placed in its desired location, perform the following steps:

1. Loosen front legs to finger tight.

2. Extend both front legs to their fullest length.

3. Gently push downward on the front edge of the seat until all four legs rest on the floor.

4. Re-tighten all bolts and nuts.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.

Polish the finish with soft cloth and an industry recognized furniture polish.

Produkt Specifikationer

Mærke:	Hooker
Kategori:	Tabel
Model:	1652-75410-MWD

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 1652-75410-MWD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tabel Hooker Manualer

Hooker 1652-75410-MWD Manual

8 Juli 2025

Hooker 5750-75401-LTWD Manual

6 Juli 2025

Hooker 5751-75203T-95 Manual

29 August 2024

Hooker 1618-75007-DKW Manual

29 August 2024

Hooker 864-80-112 Manual

29 August 2024

Hooker 366-75-218 Manual

29 August 2024

Hooker 1600-75001-MWD Manual

29 August 2024

Hooker 5840-75200-80 Manual

29 August 2024

Hooker 5990-75200-LTWD Manual

29 August 2024

Hooker 5805-75200T-85 Manual

29 August 2024

Tabel Manualer

Nyeste Tabel Manualer

Homcom 833-904V00 Manual

8 Juli 2025

Ikea VIHALS 105.927.61 Manual

5 Juli 2025

Vermeiren Albatros II Manual

5 Juli 2025

Ikea STOCKHOLM 2025 005.901.40 Manual

5 Juli 2025

Ikea VIHALS 605.951.25 Manual

5 Juli 2025

Ikea LYCKAN 405.692.26 Manual

5 Juli 2025

Ikea STOCKHOLM 2025 605.947.86 Manual

5 Juli 2025

Ikea VIHALS 605.927.68 Manual

5 Juli 2025

Ikea STOCKHOLM 2025 405.909.54 Manual

4 Juli 2025

Ikea STOCKHOLM 2025 205.901.39 Manual

4 Juli 2025