Hoover HDSV685B Manual

Hoover Emhætte HDSV685B

Læs nedenfor 📖 manual på dansk for Hoover HDSV685B (48 sider) i kategorien Emhætte. Denne guide var nyttig for 45 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/48

ENGLISH INSTALLATION AND USER‟S MANUAL

FRENCH NOTICE D‟INSTALLATION ET D‟UTILISATION

ITALIAN MANUALE D‟ISTRUZIONE

INSTALLATION AND USER‟S MANUAL

CONTENT

INTRODUCTION

SAFETY

PRECAUTION

SPECIFICATION 05

INSTALLATION

(VENT

OUTSIDE)

INSTALLATION

(VENT

INSIDE)

DESCRIPTION

COMPONENTS

OPERATION

MAINTENANCE

TROBULESHOOTING

CONFORMITY

WITH

DIRECTIVES

ENVIRONMENTAL

PROTECTION

IN ODUCTION TR

Thank you for choosing this cooker hood.

This instruction manual is designed to provide you with all required

instructions related to the installation, use and maintenance of the appliance.

In order to operate the unit correctly and safety, please read this instruction

manual carefully before installation and usage.

The cooker hood uses high quality materials, and is made with a streamlined

design. Equipped with large power electric motor and centrifugal fan, it also

provides strong suction power, low noise operation, non-stick grease filter and

easy ssembly installation. a

By placing the marking on this product, we declare, on our own

responsibility, compliance to all of European safety, health and environmental

requirements stated in the legislation for this product.

SAFE CAUTY RE P TION

Never let the children operate the machine.

The cooker hood is for home use only, not suitable for barbecue, roast

shop and other commercial purpose.

The cooker hood and its filter should be clean regularly in order to

keep in good working condition.

Clean the cooker hood according to the instruction manual and keep

the unit from danger of burning.

Forbid the direct baking from the gas cooker.

Please keep the kitchen room a good convection.

Before connecting this appliance check that the power supply cord is

not damaged. A damage supply cord must be replaced by qualified

service personnel only.

There shall be adequate ventilation of the room when the range hood

is used at the same time as appliances burning gas or other fuels;

The air must not be discharged into a flue that is used for exhausting

fumes from appliances burning gas or other fuels;

Regulations concerning the discharge of air have to be fulfilled.

Children should be supervised to ensure that they do not play with the

appliance.

Do not flambé under the range hood.

The range hood is not intende to b installed over a hob having more d e

than four hob elements

Electrical Shock Hazard



Only plug this unit into a properly earthed outlet. If in doubt seek

advice from a suitably qualiﬁed engineer.



Failure to follow these instructions can result in death, ﬁre, or

electrical shock.

Standard Installation Accessories List

Spec.

Illustration Picture

Qty

Casing

Upper Chimney

Lower Chimney

Lower chimney bracket

Upper chimney bracket

Hanging Board

φ8 rawl plugs

φ8×φ6 white color

Screws

ST4.0×30

φ7.2screws

ST4.0×8

INSTALLATION

（

（（

wall mounting

）

））

If you have an outlet to the outside, your cooker hood can be connected as

below picture by means of an extraction duct (enamel, aluminum, ﬂexible pipe

non ﬂammabe with an interior diameter of 150mm)

1. Before installation, turn the unit oﬀ and unplug it from the outlet.

2. The cooker hood should be placed at a distance of 65~75cm above

the cooking plane for best eﬀect.

3. Drill 3 x 8mm holes to accommodate the bracket. Screw and tighten

the bracket onto the wall with the screws provided.

Wall plug

Wall bracket 107.5mm

Screw(4mm x 30mm)

4. Leave up the cooker hood and hang onto the wall bracket hook.

5. Fix the one-way-valve to the air outlet of the cooker hood. Then,

attached the exhaust pipe onto the one-way-valve as shown below.

Exhaust pipe

Cooker hood

8. i. Drill 2 x 8mm holes to accommodate the plate II. Screw and

tighten the plate II onto the wall with 2 screws provided.

ii. Assembly the chimney onto the unit and ﬁx it with 2 screws.

Plate II

Wall plug

Screw

4mm x 8mm

Screw

(4mm x 30mm)

INSTALLATION (VENT INSIDE)

If you do not have an outlet to the outside, exhaust pipe is not required and

the installation is similar to the one show in section “INSTALLATION (VENT

OUTSIDE)”.

Activated carbon ﬁlter can be used to trap odors.

In order to install the activated carbon ﬁlter, the grease ﬁlter should be

detached ﬁrst. Press the lock and pull it downward.

Plug the activated carbon ﬁlter into the unit and turn it in clockwise direction.

Repeat the same on the other side.

NOTE:

oMake sure the ﬁlter is securely locked. Otherwise, it would loosen and

cause dangerous.

oWhen activated carbon filter attached, the suction power will be

lowere

DESCRIPTION OF COMPONENTS

OPERATION

Low Speed button 1

It‟s used for Ventilation on the kitchen. It is suitable for simmering and

cooking which do not make much steam.

Medium Speed button 2

Airﬂow speed is ideally for ventilation in standard cooking operation.

High Speed button 3

When high density of smoke or steam produced, press hi -speed button gh

for highest eﬀective ventilation.

Light button

NOTE: If Low / Medium / High speed buttons are press at the same time,

the unit will only operate at the highest speed.

ON/OFF button

Pressing 1-2 seconds to switch on/oﬀ the cooker hood.

Low Speed button

It‟s used for Ventilation on the kitchen. It is suitable for simmering and

cooking which do not make much steam.

Medium Speed button

Airﬂow speed is ideally for ventilation in standard cooking operation.

High Speed button

When high density of smoke or steam produced, press high-speed button

for highest eﬀective ventilation.

Light button

Short press the light/timer button ( 1 second) to switch on or switch oﬀ the

light.

Quick Timer

.Keep pressing the Light/timer button for 2-3 seconds to switch on the

quick timer.

The working speed button will become ﬂashing, the quick timer will last for

5 seconds.

When the count down ﬁnish, there will be bit sounds for 5 seconds. „ ‟

To cancel the quick timer, press Light/Timer button again or press the

ON/OFF button.

STANDBY MODE.

After plug in, all lighting, system in STANDBY MODE.

Low Speed button

cooking which do not make much steam.

Medium Speed button

Airﬂow speed is ideally for ventilation in standard cooking operation.

High Speed button

When high density of smoke or steam produced, press high-speed button

for high eﬀective ventilation.

Booster button

Depress this button to enter into highest speed and again to turn oﬀ motor.

Light button

MAINTENANCE

Before cleaning switch the unit oﬀ and pull out the plug.

I. Regular Cleaning

Use a soft cloth moistened with hand-warm mildly soapy water or

household cleaning detergent. Never use metal pads, chemical, abrasive

material or stiﬀ brush to clean the unit.

II. Monthly Cleaning for Grease Filter

ESSENTIAL: Clean the ﬁlter every m th can prevent any risk of ﬁre.on

The filter collects grease, smoke and dust…... so the ﬁlter is directly

aﬀecting the eﬃciency of the cooker hood. If not cleaned, the grease

residue (potential ﬂammable) will saturate on the ﬁlter. Clean it with

household cleaning detergent.

III. Annual Cleaning for Activated Carbon Filter

Apply SOLELY to unit that installed as a recirculation unit (not vented to

the outside). This ﬁlter traps odors and must be replaced at least once a

year

depending on how frequent the cooker hood used.

IV. Changing a light bulb

Remove the screws on the glass, take oﬀ the hood glass. Find the

bulb that requires replacement, you will ﬁnd it located in the light

ﬁxture which is inside the exposed section of the canopy.

Disconnect the light wiring point and remove the bulb holders and

wiring from the hood. Important: It‟s not possible to replace the bulbs

individually, it will be necessary to obtain the bulbs, bulb holders and

wiring as a complete part. (LED light: MAX 1.5W)

Fit the replacement bulbs, bulb holders and wiring in the same

manners as the originals. Then reconnect the light wiring point.

Reﬁt the hood glass and fasten the glass screws. Make sure the screws are

fully tightened.

TROBULESHOOTING

Fault

Cause

Solution

Light on, but

fan does not

work

The fan blade is

jammed.

Switch oﬀ the unit and repair by

qualiﬁed service personnel only.

The motor is damaged.

Both light and

fan do not

work

Halogen light bulb burn.

Replace the bulb with correct

rating.

Power cord looses.

Plug in to the power supply again.

Serious

Vibration of

the unit

The fan blade is

damaged.

Switch of the unit and repair by

qualiﬁed service personnel only.

The fan motor is not

ﬁxed tightly.

Switch oﬀ the unit and repair by

qualiﬁed service personnel only.

The unit is not hung

properly on the bracket.

Take down the unit and check

whether the bracket is in proper

location.

Suction

performance

not good

Too long distance

between the unit and

the cooking plane

Readjust the distance to 65-75cm

CUSTOMER ASSISTANCE SERVICE

If you cannot identify the cause of the operating anomaly, switch oﬀ the

appliance and contact the Assistance Service.

PRODUCT SERIAL NUMBER. Where can I ﬁnd it?

It is important you to inform the Assistance Service of your product code

and its serial number (a 16 character code which begins with the number 3);

this can be found on the guarantee certiﬁcate or on the data plate located

on the appliance.

It will help to avoid wasted journeys to technicians, thereby (and most

signiﬁcantly) saving the corresponding callout charges.

This appliance is marked according to the European directive

2012/19/EU on Waste Electrical and Electronic Equipment

(WEEE).

WEEE contains both polluting substances (which can cause

negative consequences for the environment) and basic components (which

can be re-used). It is important to have WEEE subjected to speciﬁc

treatments, in order to remove and dispose properly all pollutants, and

recover and recycle all materials.

Individuals can play an important role in ensuring that WEEE does not

become an environmental issue; it is essential to follow some basic rules:

WEEE should not be treated as household waste;

WEEE should be handed over to the relevant collection points managed by

the municipality or by registered companies. In many countries, for large

WEEE, home collection could be present.

In many countries, when you buy a new appliance, the old one may be

returned to the retailer who has to collect it free of charge on a one- -one to

basis, as long as the equipment is of equivalent type and has the same

functions as the supplied equipment.

Produkt Specifikationer

Mærke:	Hoover
Kategori:	Emhætte
Model:	HDSV685B
Type:	Vægmonteret
Vekselstrømsindgangsspænding:	220 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	600 mm
Dybde:	500 mm
Vægt:	11700 g
Produktfarve:	Rustfrit stål
Kontroltype:	Berøring
Antal hastigheder:	4
Pakkevægt:	14500 g
Pakkedybde:	380 mm
Pakkebredde:	645 mm
Pakkehøjde:	560 mm
Årligt energiforbrug:	37 kWh
Husmateriale:	Rustfrit stål
Tilsluttet belastning:	1000 W
Lampetype:	LED
Støjniveau:	62 dB
Energieffektivitetsskala:	A+++ til D
Energieffektivitetsklasse:	A
Pæreeffekt:	3 W
Maksimal ekstraktionseffekt:	498 m³/t
Udsugningsforbindelse, diameter:	150 mm
Fedtfilter type:	Aluminium
Ekstraktionstype:	Ledet
Intensiv hastighed:	Ja
Antal motorer:	1
Væske - dynamisk effektivitetsklasse:	A
Lys - effektivitetsklasse:	B
Fedt - filtrering effektivitetsklasse:	D
Højde uden skorsten:	548 mm
Luftudsugningseffekt i boost-position:	612 m³/t