Hoover HL C10DF-80 Manual

Hoover Tørretumbler HL C10DF-80

Læs gratis den danske manual til Hoover HL C10DF-80 (10 sider) i kategorien Tørretumbler. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Hoover HL C10DF-80, eller vil du spørge andre brugere om produktet?

Side 1/10
2.
DRAIN HOSE : FITTING INSTRUCTIONS
FOR TANK IN DOOR DRAWER
To avoid emptying the water container after
each drying cycle, the water can be discharged
directly to a waste water drain pipe (the same
drainage system as household sinks). Water
Bye-Laws prohibit connection to a surface
water drain. The waste water drain pipe should
be located adjacent to the tumble dryer.
The kit consists of:1 hose and 1 tap.
WARNING! Switch off and remove the
tumble dryer plug from the electricity supply
before carrying out any work.
Fit he s Follows:t Hose a
1.Tilt the machine
backwards.
2. The waste water
pipe is situated at the
right-hand side of the
machine (see the
picture). A grey hose
connects to the bridge
at the left hand side of
the machine. Using
pliers, remove the
pipe retaining clip
from the bridge.
3. Pull the hose off the
bridge connection.
4. Attach the black
hose from the kit,
( using the connector
a n d p i p e c l i p s
supplied , to the hose )
removed from the
bridge connection.
5 . P l a c e t h e t a p
supplied by the kit to
close the remaing
hose.
Connect the new drain
hose to the waste
black w ater pipe .
6. Once the machine is
in place, check the
bottom to ensure that
the new hose does not
kink when pushing the
tum bl e d ry er into
position.
Connect to the mains
electricity supply.
8
1
2
3
4
5
6
water kit is suitable only on models with the
water tank on the door.
NOTE:
The direct drain condensed


Produkt Specifikationer

Mærke: Hoover
Kategori: Tørretumbler
Model: HL C10DF-80

Har du brug for hjælp?

Hvis du har brug for hjælp til Hoover HL C10DF-80 stil et spørgsmål nedenfor, og andre brugere vil svare dig