Hoshizaki Commercial CRMR60-D4 Manual

Hoshizaki Køleskab Commercial CRMR60-D4

Læs gratis den danske manual til Hoshizaki Commercial CRMR60-D4 (2 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Hoshizaki Commercial CRMR60-D4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Dimensions / Capacity

Interior Storage Capacity (CF)

Interior Storage Capacity (CF) (AHAM)

Overall Width x Depth (including 1” bumper)

Height (including 4” casters)

Door Opening Width x Height

Depth with Drawer Fully Open

(including 1” bumper)

Pan Capacity

Crated Weight

Crated Width x Depth x Height

Features

Electrical / Refrigeration

Voltage

HACR Breaker

Electrical Connection

(NEMA)

Voltage Range

Ambient Temp. Range

Control Setpoint Range

Amperage

Energy Consumption

(kWh/day) @ASHRAE

Heat Rejection (BTU/Hr.) @NSF

Approx. Nominal Compres. BTU/HR (HP)

Refrigerant / Charge Amount (oz)

2.25” Casters

6” Casters

6” Legs

Options

Hoshizaki reserves the right to change specifications without notice.

Item #:

Project:

Qty:

AIA#:

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com

Valid in United States, Canada, Puerto

Rico and U.S. Territories. Contact

factory for warranty in other countries.

3 Year - parts and Labor on

entire machine.

5 Year - Parts on Compressor

W x D x H

60” x 30” x 33.63”*

*with 4” casters

Printed in the U.S.A.

17.55 ft

16.6 ft

60” x 31”

33.63”

25.5” x 22.9”

50.25”

(1) 12” x 20” x 6” deep

308 lbs.

62” x 34” x 36.5”

115/60/1

15.0 Amps

5-15P

104-126

45° to 100°F

32° to 52°F

4.2

2.15

473.5

1386(1/5HP)

R-134a (8 oz)

CRMR60-D4

Overshelves

Stainless steel back

Two Section

CRMR60-D4

Two Section

• Cabinet and drawers are insulated with 2” CFC free,

foamed in place polyurethane

• Drawer slides are constructed of 16 gauge stainless

steel with acetal rollers

• Drawers will accommodate (1) 12” x 20” x 6” deep

pan (pan by others)

• Extruded aluminum flush mount drawer handle

• Magnetic drawer gasket is easily removable for

cleaning

• Enamel coated evaporator coil

• Standard with 4” casters (two with brakes)

• Three year parts and labor warranty

• Five year compressor warranty

• 8 ft. cord and plug

Commercial Series Undercounter Refrigerator with Drawers

CRMR60-D4

08/29/17

Item # 13353

Warranty

Engineered to maintain NSF-7

temperatures in 100°F ambient.

Stainless steel exterior front, sides,

and top with stainless steel interior

sides, back, and floor

Front breathing air flow design

The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient

non-electric evaporation system. A capillary tube controls the flow of environmentally friendly R-134a refrigerant through the evaporator. Refrigeration system utilizes an

“off cycle” defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot cord and plug (20.0 amps or less).

SIDE VIEW

FRONT VIEW

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com

Printed in the U.S.A.

CRMR60-D4

PLAN VIEW

The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior

features stainless steel back, sides, and floor with an ABS top. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the

shelves are adjustable in ½” increments. Cabinet walls and doors are insulated with 2” of environmentally friendly, CFC free, foamed in place polyurethane. 4” polyolefin, stem

casters (two with brakes) are standard.

Drawer fronts are constructed of high grade stainless steel inside and out and are insulated with R-134a CFC free foamed in place polyurethane. Each drawer accommodates

(1) 12” x 20” x 6” pan per drawer (pans by others). Drawer frames are formed of 14 gauge stainless steel and securely fastened in the cabinet. The drawer slides are 16 gauge

stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear. The drawer slides have a dynamic load capacity of 175 lbs. and

have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The flush mount handles are constructed of extruded

aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.

CRMR60-D4

60”

3.63”

19.5”

49.25”

1”

60”

30”

1”

33.63”

19.6”