Hoshizaki HUF40A Manual

Hoshizaki Fryser HUF40A

Læs gratis den danske manual til Hoshizaki HUF40A (2 sider) i kategorien Fryser. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Hoshizaki HUF40A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

HUF40/68A

5/11/16

Item # 13157

nc. reserves the right to change

specifications without notice.

*AutoCad available on KCL

Item #

Project:

Qty:

• Stainless steel interior and exterior top, front and sides

• EverCheck solid state digital control system with visual alarms

• Entire cabinet and doors are insulated with 2 3/8" CFC free foamed in place polyurethane

• Exclusive "Stepped" door design to protect recessed door gasket

• Self-closing all stainless steel doors with locks

• Doors are reversible at the factory (no charge)

• Dual door frame heaters to eliminate condensation

• Epoxy coated evaporator coil

• Front breathing with Zero clearance requirements

• Cartridge-style refrigeration system is easily removed from main unit

• Defrost is time initiated temperature terminated

• Hinged, louvered front panel for easy access to controller

• Removable stainless steel end panel for access to refrigeration system

• Removable, cleanable refrigeration system Air Filter

• Energy efficient automatic hot gas condensate evaporator

• (1) Epoxy coated wire shelf per section

• Stainless steel shelf supports adjustable on 1” centers

• 4" heavy duty platform casters (two with brakes)

• Three years parts and labor warranty

• Five year compressor warranty

• 8 ft. cord and plug

HUF-A Dimensions

W x D x H

1 Section - 40.25” x 32.3” x 33.9”*

2 Section - 68” x 32.3” x 33.9”*

*with 4” casters

Electrical/Refrigeration

Voltage - 115/60/1

ACR Breaker - 15.0

lectrical Connection - 5-15P

(NEMA)

Voltage Range - 104-126

Ambient Temp. Range - 45˚-100˚F

Control Setpoint Range - -13˚ to +19˚F

*Refrigerant R-404A

Warranty

Valid in United States, Canada, Puerto Rico,

and U.S. Territories. Contact factory for

warranty in other countries.

• Three Year - Parts & Labor on entire

machine.

• Five Year - Parts on: Compressor.

Options

• 6” Legs

• 6” Casters

• Tray pan rack slides (18” x 26” pans)

• Bullnose top (front & rear)

• Stainless steel back

• Drawers

• Additional epoxy shelves

Dimensions / Capacity

Electrical & Refrigeration Data

Model # One Section

HUF40A

Two Section

HUF68A

Interior Storage Capacity (CF) 8.5 ft

18.8 ft

Overall Width x Depth 40.25” x 32.3” 68” x 32.3”

Height (including 4” casters) 33.9” 33.9”

Door Opening Width x Height 22.5” x 24.3” 22.5” x 24.3”

Depth with Door open at 90° 56.8” 56.8”

Adjustable Shelves 1 2

Shelf Dimensions (W x D) 22.4” x 24.6” 25.0” x 24.6”

Crated Shipping Weight 317 lbs 442 lbs

Crated Height x Width x Depth 39.5” x 44.25” x 36.25” 39.5” x 72” x 36.25”

Model # One Section

HUF40A

Two Section

HUF68A

Amperage

4.8 10.0

Energy Consumption (kwh/day)

4.97 9.45

Heat Rejection (BTU/Hr.)

1133 1565

Approx. Nominal Compres. BTU/HR(HP)

1378 (3/8HP) 2466 (1/2HP)

HUF40/68A

Professional Series Undercounter Freezers

618 Hwy. 74 S., Peachtree City, GA 30269

TEL 800-438-6087

FAX 800-345-1325

www.hoshizaki.com

HUF40/68A

Professional Series Undercounter Freezers

618 Hwy. 74 S., Peachtree City, GA 30269 • TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com

Cabinet Construction

The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are made from galvanized steel. The cabinet

interior walls and ceiling are stainless steel. The floor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty ABS thermal breaks

are used to reduce heat transfer in the door frames. One (1) heavy duty epoxy coated shelf per section is standard. Mounted on stainless steel pilasters the shelf

is adjustable in 1” increments. The cabinet door perimeter heater provides condensation control in high humidity environments and is equipped with a back-up

heater should the primary fail. Cabinet walls and doors are insulated with 2 3/8” of environmentally friendly R-134A, CFC free foamed in place polyurethane. 4"

heavy duty platform casters (2 with brakes) are standard and installed at the factory.

Door Construction

Doors are constructed of high grade stainless steel inside and out, are insulated with R-134a CFC free foamed in place polyurethane and are standard with locks.

Hoshizaki’s exclusive “stepped” design protects the recessed door gasket from sharp pan edges as product is removed from the cabinet. Low profile handles are

constructed of rugged injected molded ABS. The hinges are all metal and include a nylon cam to facilitate the self closing feature. Hinge plates are constructed of

eight (8) gauge stainless steel and include a welded hinge pin. Doors stay open at 105˚and are self-closing at 75˚. Snap-in magnetic door gaskets are durable and

easily removed for cleaning. Door hinging is reversible at the factory without cost.

Refrigeration System

The high efficiency self contained refrigeration system is designed with a large capacity condenser and evaporator resulting in lower overall energy costs. The

refrigeration system components are fully assembled and mounted on a 16 gauge galvanized steel cassette that is removable from the main unit. All heat exchange

takes place outside the food zone and allows for 100% utilization of the interior storage area. The evaporator coil is epoxy coated for extended life. Stainless steel

refrigerant tubing is used as the hot gas condensate evaporator. A capillary tube system controls the flow of R-134A refrigerant. A removable, cleanable air filter

protects the condenser coil and helps reduce cleaning requirements of the refrigeration system. 115 volt units are equipped with an eight foot cord and plug

(20.0 amps or less).

The EverCheck

Solid State Digital Control System monitors the operation and performance of the refrigeration system and is standard on all Professional Series

undercounter and worktop units. The solid state controls maintain optimum cabinet temperature, and monitor high and low temperatures, high pressure, high and

low voltage and clean filter functions. It also provides visual alarms to alert the operator to possible problems. An LED display shows the cabinet temperature and

is adjustable to Fahrenheit or Celsius. Defrost cycles are time initiated, temperature terminated and can be set to cycle from one to twelve hour intervals to

prevent ice formation and maintain optimum cabinet temperatures.

HUF40A HUF68A

30"

24.3"

3.9"

25.6"

2.5"

30"

33.9"

HUF40A HUF68A (DOOR SWING) (DOOR SWING)

5.6"

56.8"