Hotone Loudster Manual


Læs gratis den danske manual til Hotone Loudster (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 71 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 36 anmeldelser. Har du et spørgsmål om Hotone Loudster, eller vil du spørge andre brugere om produktet?

Side 1/2
Power Requirement: 18-20V DC center positive
Current Consumption: Min. 4.5A
Input Impedance: 500kΩ
Speaker Output: 4-16 , self-adaptiveΩ
Max. Output Power (19V):
75 Watts @ 4 / 40 Watts @ 8 / 20 Watts @ 16Ω Ω Ω
Dimensions: 190mm(D) x 118.5mm(W) x 53.5mm (H)
Weight: 590g
IMPORTANT: TURN ON FIRST, TURN OFF LAST.
Always turn down the volume knob on your power amp before plugging or unplugging
power jacks, cables, etc.
The power amp is protected against the following malfunctions: short-circuit, overheating,
over-voltage, under-voltage and DC issues. ALL OUTPUTS WILL BE MUTED in case the
above malfunctions occur. If this happens, please check the power supply and all cable
connections, then restart the unit and resume normal operation.
The contents of this manual are subject to change without notice.
Controls the output volume
1
2
Power amp input jack, for connecting pedals/preamps
3
18-20V DC adapter plug (center positive)
4
5
Cabinet connector jack (4-16 Ω)
6
Unit on/off switch


Produkt Specifikationer

Mærke: Hotone
Kategori: Ikke kategoriseret
Model: Loudster

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotone Loudster stil et spørgsmål nedenfor, og andre brugere vil svare dig