Hotpoint FDD 9640G UK Manual

Hotpoint Vaskemaskine FDD 9640G UK

Læs gratis den danske manual til Hotpoint FDD 9640G UK (16 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Hotpoint FDD 9640G UK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

! This symbol reminds you to read this instruction

manual.

Contents

Installation, 2-3-4-5

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Care and maintenance, 6

Cutting off the water or electricity supply

Cleaning the washer-dryer

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 7

General safety

Disposal

Description of the washer-dryer, 8-9

Control panel

Display

How to run a wash cycle or a drying cycle, 8

Wash cycles and functions, 9

Table of wash cycles

Wash functions

Detergents and laundry, 10

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Troubleshooting, 13-14

Product Guarantee and Repair Information, 15

FDD 9640

Instructions for use

English,1

WASHER-DRYER

Installation

ning the adjustable front feet the (see figure);

angle of inclination, measured according to the

worktop, must not exceed 2°.

Levelling your appliance correctly will provide

it with stability and avoid any vibrations, noise

and shifting during operation. If it is placed on

a fitted or loose carpet, adjust the feet in such

a way as to allow enough room for ventilation

beneath the washer-dryer.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply

pipe by screwing it to

a cold water tap using

a 3/4 gas threaded

connection (see figu-

re).

Before performing the

connection, allow the

water to run freely un-

til it is perfectly clear.

2. Connect the other

end of the water inlet

hose to the washer-

dryer, screwing it onto

the appliance’s cold

water inlet, situated

on the top right-hand

side on the rear of the

appliance (see figure).

3. Make sure there are no kinks or bends in the

hose.

! The water pressure at the tap must be within

the values indicated in the Technical details

table (on the page 5).

! If the water inlet hose is not long enough,

contact a specialist store or an authorised

serviceman.

! Ensure that the supply taps are allowing wa-

ter through. Old taps may seize in the closed

position and thus prevent water reaching the

machine.

! Never use second-hand or old inlet hoses;

use the products supplied with the machine.

! Keep this instruction manual in a safe place

for future reference. Should the appliance be

sold, transferred or moved, make sure the

instruction manual accompanies the washer-

dryer to inform the new owner as to its opera-

tion and features.

! Read these instructions carefully: they contain

vital information on installation, use and safety.

Unpacking and levelling

Unpacking

! This is a separate

part of the polystyre-

ne base and should

be removed with the

base.

! IMPORTANT check

when unpacking

your machine.

1. Unpack the washer-dryer.

2. Check whether the washer-dryer has been

damaged during transport. If this is the case,

do not install it and contact your retailer.

3. Remove the 4 pro-

tective screws and

the rubber bush with

the respective spacer,

situated on the rear of

the appliance (see also

the installation leaflet).

4. Seal the gaps using

the plastic plugs provi-

ded.

5. Keep all the parts: you will need them again

if the washer-dryer needs to be moved to ano-

ther location.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable

amount of noise if the two front feet have not

been adjusted correctly.

1. Install the washer-dr-

yer on a flat sturdy floor,

without resting it up

against walls, cabinets

or anything else.

2. If the floor is not per-

fectly level, compensa-

te for any unevenness

by tightening or loose-

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Vaskemaskine
Model:	FDD 9640G UK
Bredde:	595 mm
Dybde:	540 mm
Højde:	850 mm
Vægt:	66000 g
Produktfarve:	Grafit
Kontroltype:	Knapper
Indbygget skærm:	Ja
Skærmtype:	LCD
Energieffektivitetsklasse (gammel):	A
Placering af apparat:	Fritstående
Dørhængsel:	Venstre
Inverter-teknologi:	Ingen
Ilægningstype:	Front-læsning
Maksimal centrifugeringshastighed:	1400 rpm
Antal vaskeprogrammer:	8
Støjniveau (centrifugering):	81 dB
Støjniveau (vask):	55 dB
Forsinket start-timer:	Ja
Vaskeprogrammer:	Cotton, Eco, Wool, Quick, Synthetics, White, Delicate/silk
Børnesikring:	Ja
Justerbare fødder:	Ja
Energiforbrug ved vask:	1.17 kWh
Årligt energiforbrug vask:	234 kWh
Vaskeklasse:	A
Årligt vandforbrug vask:	12000 L
Indikator for LED-programfase:	Ja
Forsinket start (maks.):	24 t
Energieffektivitetsskala:	A til G
Indikator for resterende tid:	Ja
Wi-Fi kontrolleret:	Ingen
Brugerdefineret panel klar:	Ingen
Cyklustid (hurtigt vaskeprogram):	30 min.
Tørreprogrammer:	Wool, Cotton, Synthetics
Tørreevne:	6 kg
Vaske kapacitet:	9 kg
Støjniveau (tørring):	61 dB
Cyklustid vask og tørring:	615 min.
Årligt energiforbrug ved vask og tørring:	1224 kWh
Årligt vandforbrug ved vask og tørring:	20000 L
Vandforbrug pr. vask:	60 L
Energiforbrug pr. vask og tørring:	6.12 kWh
Vandforbrug pr. vask og tørring:	100 L
Tilføj tøj (pause) -funktion:	Ja