Hotpoint HA3FC10BS7A0S Manual

Hotpoint Opvaskemaskine HA3FC10BS7A0S

Læs gratis den danske manual til Hotpoint HA3FC10BS7A0S (24 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Hotpoint HA3FC10BS7A0S, eller vil du spørge andre brugere om produktet?

Side 1/24
ENQuick Guide
1
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
It is mandatory that the salt reservoir never be empty.
It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Only the rst time you do this: ll the salt reservoir
with water.
3. Position the funnel (see gure) and ll the salt reservoir
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning eciency.
This system regenerates itself with salt, therefore it is required to rell
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
Single regeneration consumes: ~3.5L of water;
Takes up to 5 additional minutes for the cycle;
Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the appli-
ance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser D only. Place the amount of detergent for
pre-washing directly inside the tub. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the program so
that the best washing and drying results are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
CONTROL PANEL
FIRST TIME USE
More information in the Daily Reference Guide on website.
PROGRAMS TABLE
1. On-O / Reset button with indicator light
2. Program selection button with indicator
light
3. Zone Wash button with indicator light /
Keylock
4. Eco program indicator light
5. Keylock indicator light
6. Display
7. Program number and remaining time
indicator
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
THANK YOU FOR BUYING A HOTPOINT ARISTON PRODUCT.
In order to receive a more complete assistance, please register
your appliance on: www.hotpoint.eu/register
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
8. Tablet (Tab)
indicator light
9. Closed water tap
indicator light
10. Rinse Aid rell
indicator light
11. Salt rell indica-
tor light
12. 3D Zone Wash button with indicator light /
Tablet (Tab)
Program
Programs description
Drying
phase
ActiveDry
Available
options
*)
Duration
of wash
program
(h:min)
**)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
1.
Eco 50°- Program is suitable to clean normally soiled tableware, that
for this use, it is the most ecient programme in terms of its combined
energy and water consumption, and that it is used to assess compli-
ance with the EU Ecodesign legislation.
3:35 8.7 0.59
2.
Auto Intensive 65° - Automatic program for heavily soiled dishes and
pans (not to be used for delicate items).
2:00 - 3:10 14.0 - 17.0 1.50 - 1.85
3.
Auto Mixed 55° - Automatic program for normally soiled pans and
dishes.
1:20 - 3:00 7.0 - 14.0 0.70 - 1.10
4.
Auto Fast Wash 50° - Automatic program for limited quantity of nor-
mally soiled crockery. Ensures optimal cleaning performance in short-
er time.
0:55 - 1:20 11.0 - 14.5 1.15 - 1.25
5.
Delicates 45° - Program for delicate items, which are more sensitive to
high temperatures, for example glasses and cups.
1:40 12.0 1.20
6.
Rapid 30’ 45° - Program to be used for half load of lightly-soiled dishes
with no dried food residues. Without drying.
-
0:30 9.0 0.50
7.
Good Night 50° - Suitable for night-time operation of the appliance.
Ensures optimal cleaning and drying performance with the lowest
noise emission.
3:30 16.0 1.15
8.
Sanitizing 65° - Normally or heavily soiled crockery, with additional
antibacterial wash. Can be used to perform maintenance of the dish-
washer.
-
1.50 12.0 1.30
3
1
2
8
13
14
5
4
6
7 11 12
9
10
13. Delay button with indicator light
14. Start/Pause button with indicator light / Drain out


Produkt Specifikationer

Mærke: Hotpoint
Kategori: Opvaskemaskine
Model: HA3FC10BS7A0S

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint HA3FC10BS7A0S stil et spørgsmål nedenfor, og andre brugere vil svare dig