Hotpoint HTC18D011A1 Manual

Hotpoint Køleskab HTC18D011A1

Læs gratis den danske manual til Hotpoint HTC18D011A1 (4 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Hotpoint HTC18D011A1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Quick guide

THANK YOU FOR BUYING A HOTPOINT PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. LED Light

2. On/Stand-by

3. Freezer and refrigerator compartment

temperature button

ON/STAND-BY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

FREEZER AND REFRIGERATOR

COMPARTMENT TEMPERATURE

The three LED indicators indicate the refrigerator compartment

set temperature. It is possible to set a dierent temperature of the

appliance with the button.

The following adjustments are possible:

LEDs lit Set temperature

High (less cold)

Medium-high

Medium

Medium-low

Low (colder)

FAN*

You can turn the Fan on/o by pressing the button on the b

shown in the gure). If the ambient temperature exceeds

27°C, or if drops of water are present on the glass shelves,

it is essential that the fan is on to ensure the proper

preservation of the food. Deactivation of the fan allows

energy consumption to be optimised.

FREEZING FRESH FOOD

Place the fresh food to be frozen in the FREEZING ZONE in the freezer

compartment avoiding the direct contact with the food that is already

frozen. To optimize the freezing speed, the lower drawer can be

removed and the food can be placed directly on the bottom of the

compartment.

FAST COOL FUNCTION (FAST COOLING)

To quickly cool the refrigerator compartment, or

6 hours before putting a large quantity of food

to be frozen in the freezer compartment, turn

on the “Fast Cooling” function by repeatedly

pressing the button until the 3 icons ash

green and then stay constant.

The function automatically turns o after 30 hours and the

temperature returns to the previous setting when the function is

turned on.

To turn the function o manually, press the button.

Note: avoid a direct contact between the fresh food and the food that is

already frozen.

To optimize the freezing speed, the lower drawer can be removed and

the food can be placed directly on the bottom of the compartment.

Recommended setting:

• Refrigerator compartment: MEDIUM

To avoid food waste, please refer to the recommended setting and storage

times found in the online user manual.

* Available only on certain models

Light system (depending on model)

This product contains a light source of energy

eciency class G

This product contains 4 lateral light sources of

energy eciency class F

This product contains a light source of energy

eciency class G

This product contains 4 lateral light sources of

energy eciency class F and a top light source

of energy class G

This product contains a top light source of

energy eciency class G

FREEZER COMPARTMENT

Freezing fresh food

1. It is advisable to set the temperature colder or turn on the Fast Freeze/

Fast Cool* at least four hours before removing the food from the

freezer compartment, to prolong the preservation of the food during

the defrosting phase.

2. To defrost, unplug the appliance and remove the drawers. Leave

the door open to allow the frost to melt. To prevent the water from

escaping during the defrost, it is advised that you place an absorbent

cloth on the bottom of the freezer compartment and wring it out

regularly.

3. Clean the inside of the freezer compartment with the ice scraper and

dry it carefully.

4. Turn the appliance back on and put the food back inside. To remove

the frost on the STOP FROST* accessory, follow the CLEANING.

Ice cubes*

Fill 2/3 of the ice tray with water and put it back in the freezer

compartment. Do not, under any circumstances, use sharp or pointed

objects to remove the ice.

The quantity of fresh food that can be frozen in a specic time period is

indicated on the rating plate.

Load limits are determined by baskets, aps, drawers, shelves etc. Make

sure that these components can still close easily after loading

GENERAL INFORMATION

The drawers, baskets and shelves should be kept in their current position

unless otherwise specied in this quick guide. The light system inside the

refrigerator compartment uses LED lights, allowing for better lighting than

with traditional light bulbs, as well as for very low energy consumption.

Doors and lids of the refrigeration appliance should be removed before

disposal in the landll, to avoid children or animals getting trapped inside.

STOP FROST SYSTEM*

The STOP FROST SYSTEM facilitates the defrost procedure for the

freezer compartment.

The STOP FROST accessory is designed to collect some of the frost

that forms in the freezer compartment and it is easy to remove and

clean, therefore reducing the time needed to defrost the freezer

compartment.

To remove the frost on the STOP FROST accessory follow the cleaning

procedure demonstrated below.

PROCEDURE TO CLEAN THE STOP FROST ACCESSORY

1. Open the freezer compartment door and remove the upper

drawer.

2. Unfasten the STOP FROST accessory and remove it, taking care not

to drop it on the glass shelf below.

Note: if the accessory is jammed or difficult to remove, do not keep

trying to remove it, but proceed with the complete defrost of the freezer

compartment.

3. Close the door of the freezer compartment.

4. Remove the frost on the accessory by rinsing it under running (not

hot) water.

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Køleskab
Model:	HTC18D011A1

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint HTC18D011A1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køleskab Hotpoint Manualer

Hotpoint HAT70I 932 W DC Manual

12 August 2025

Hotpoint HP1K 25402 XP7E Manual

6 August 2025

Hotpoint HAFC9 TA33SX H Manual

2 August 2025

Hotpoint HTC18 T112 UK Manual

2 August 2025

Hotpoint HABUL011 Manual

2 August 2025

Hotpoint HTC18 T514 UK Manual

2 August 2025

Hotpoint HA8 SN1E X Manual

1 August 2025

Hotpoint BDFS 2421 Manual

1 August 2025

Hotpoint BCB 7030 D2 Manual

1 August 2025

Hotpoint BCB 70301 AA Manual

1 August 2025

Køleskab Manualer

Nyeste Køleskab Manualer

Hisense FCN331AFE Manual

14 August 2025

Hoover HOM4SE68W Manual

14 August 2025

Hisense RQ563N4SWF1 Manual

14 August 2025

Hisense RT641N4WFE1 Manual

14 August 2025

Hisense HR6BF121B Manual

14 August 2025

Hisense RQ760N4SBFE Manual

14 August 2025

Hisense HRTF205 Manual

14 August 2025

Hisense HRTF205S Manual

14 August 2025

Hisense HRTF504 Manual

14 August 2025

Hisense HR6TFF437 Manual

14 August 2025