Hotpoint RPD 1047 DX EU Manual

Hotpoint Vaskemaskine RPD 1047 DX EU

Læs gratis den danske manual til Hotpoint RPD 1047 DX EU (84 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Hotpoint RPD 1047 DX EU, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/84

Contents

Installation, 2-3

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Care and maintenance, 4

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 5

General safety

Disposal

Opening the porthole door manually

Description of the washing machine, 6-7

Control panel

Display

Running a wash cycle, 8

Wash cycles and functions, 9

Table of wash cycles

Wash functions

Detergents and laundry, 10

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Troubleshooting, 11

Service, 12

RPD 1047 D

Instructions for use

WASHING MACHINE

English,1

GB DE

Deutsch,13

Español,25

ΕΛΛΗΝΙΚΑ,49

Türkçe,37

Česky,61

Slovensky,73

Installation

! This instruction manual should be kept in a

safe place for future reference. If the washing

machine is sold, transferred or moved, make

sure that the instruction manual remains with

the machine so that the new owner is able to

familiarise himself/herself with its operation

and features.

! Read these instructions carefully: they con-

tain vital information relating to the safe instal-

lation and operation of the appliance.

Unpacking and levelling

Unpacking

1. Remove the washing machine from its

packaging.

2. Make sure that the washing machine has

not been damaged during the transportation

process. If it has been damaged, contact the

retailer and do not proceed any further with

the installation process.

3. Remove the 4 pro-

tective screws (used

during transportation)

and the rubber wa-

sher with the cor-

responding spacer,

located on the rear

part of the appliance

( ).see figure

4. Close off the holes using the plastic plugs

provided.

5. Keep all the parts in a safe place: you will

need them again if the washing machine ne-

eds to be moved to another location.

! Packaging materials should not be used as

toys for children.

Levelling

1. Install the washing

machine on a flat

sturdy floor, without

resting it up against

walls, furniture cabi-

nets or anything else.

2. If the floor is not

perfectly level, com-

pensate for any une-

venness by tightening or loosening the adju-

stable front feet ( ); the angle of incli-see figure

nation, measured in relation to the worktop,

must not exceed 2°.

Levelling the machine correctly will provide

it with stability, help to avoid vibrations and

excessive noise and prevent it from shifting

while it is operating. If it is placed on carpet or

a rug, adjust the feet in such a way as to allow

a sufficient ventilation space underneath the

washing machine.

Connecting the electricity and

water supplies

Connecting the water inlet hose

1. Connect the inlet

hose by screwing it to

a cold water tap using

a 3/4 gas threaded

connection (see figu-

re).

Before performing the

connection, allow the

water to run freely until

it is perfectly clear.

2. Connect the inlet

hose to the washing

machine by screwing

it onto the correspon-

ding water inlet of the

appliance, which is

situated on the top

right-hand side of the

rear part of the ap-

pliance . (see figure)

3. Make sure that the hose is not folded over

or bent.

! The water pressure at the tap must fall within

the range of values indicated in the Technical

data table (see next page).

! If the inlet hose is not long enough, contact a

specialised shop or an authorised technician.

! Never use second-hand hoses.

! Use the ones supplied with the machine.

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Vaskemaskine
Model:	RPD 1047 DX EU
Bredde:	595 mm
Dybde:	605 mm
Højde:	850 mm
Vægt:	75900 g
Produktfarve:	Hvid
Kontroltype:	Rotary, Touch
Indbygget skærm:	Ja
Pakkedybde:	655 mm
Pakkebredde:	645 mm
Pakkehøjde:	890 mm
Energieffektivitetsklasse (gammel):	A+++
Strømforbrug (slukket):	0.5 W
Placering af apparat:	Indbygget
Dørhængsel:	Venstre
Ilægningstype:	Front-læsning
Tromlekapacitet:	10 kg
Maksimal centrifugeringshastighed:	1400 rpm
Antal vaskeprogrammer:	16
Støjniveau (centrifugering):	76 dB
Støjniveau (vask):	56 dB
Forsinket start-timer:	Ja
Vaskeprogrammer:	Hygiene/anti-allergy, Baby care, Blouse/shirt, Cotton, Daily care, Hand/wool, Pillow, Quick, Sport, Synthetics, White, Delicate/silk
Børnesikring:	Ja
Energiforbrug ved vask:	0.679 kWh
Årligt energiforbrug vask:	141 kWh
Tromle volumen:	71 L
Dør farve:	Krom
Certificering:	WEEE, CE
Balance system:	Ja
Spin-tørre klasse:	B
Cyklustid (maks.):	340 min.
Restfugtighed:	53 %
Årligt vandforbrug vask:	12460 L
Indikator for LED-programfase:	Ja
Halv belastning:	Ja
Selvrensende:	Ja
Rense plus funktion:	Ja
Overløbsbeskyttelse:	Ja
Brugerdefineret panel klar:	Ingen
Cyklustid (hurtigt vaskeprogram):	30 min.
Skærmlys:	Ja
Åben dør alarm:	Ja
Minimum centrifugeringshastighed:	800 rpm
Belysningsfarve:	Ravfarvet
Lydalarm:	Ja