Hotpoint SI4 854 C IX Manual

Hotpoint Ovn SI4 854 C IX

Læs gratis den danske manual til Hotpoint SI4 854 C IX (12 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Hotpoint SI4 854 C IX, eller vil du spørge andre brugere om produktet?

Side 1/12
EN
1
PRODUCT DESCRIPTION
CONTROL PANEL
1. Control panel
2. Fan
3. Circular heating element
(not visible)
4. Shelf guides
(the level is indicated on the front
of the oven)
5. Door
6. Upper heating element/grill
7. Lamp
8. Identification plate
(do not remove)
9. Lower heating element
(not visible)
1. LEFT-HAND DISPLAY
2. ON / OFF
For switching the oven on and off
and for stopping an active function
at any time.
3. BACK
For returning to the previous menu
when configuring settings.
4. TEMPERATURE
For setting the temperature.
5. KNOB
For selecting menu items and
changing or adjusting the settings
of a function.
6. START
For starting functions and
confirming settings.
7. TIME
For setting or changing the time
and adjusting the cooking time.
8. CONFIRM
For confirming an item you have
selected or the settings for a
function.
9. RIGHT-HAND DISPLAY
DAILY REFERENCE
GUIDE
Before using the appliance carefully read the Health and Safety guide.
THANK YOU FOR PURCHASING AN
HOTPOINT PRODUCT
To receive more comprehensive help and
support, please register your product at
www.hotpoint.eu/register
You can download the Safety Instructions
and the Use and Care Guide by visiting our
website docs.hotpoint.eu and following
the instructions on the back of this booklet.
5
4
3
2
1
5
4
3
2
1
1
2
3
4
5
8
9
7
6
1 2 5 6 93 4 7 8
2
ACCESSORIES
Download the Use and Care Guide from
docs.hotpoint.eu for more information
WWW
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
FITTING THE SLIDING RUNNERS (IF PRESENT)
Remove the shelf guides from the oven and remove
the protective plastic from the sliding runners.
Fasten the upper clip of the
runner to the shelf guide
and slide it along as far as it
will go. Lower the other clip
into position.
To secure the guide, press
the lower portion of the
clip firmly against the shelf
guide. Make sure that the
runners can move freely.
Repeat these steps on the
other shelf guide on the
same level.
Please note: The sliding runners can be tted on any level.
REMOVING AND REFITTING THE SHELF GUIDES
. To remove the shelf guides, lift the guides up and
then gently pull the lower part out of its seating: The
shelf guides can now be removed.
. To refit the shelf guides, first fit them back into
their upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating.
WIRE SHELF DRIP TRAY BAKING TRAY SLIDING RUNNERS*
GRILL PAN SET The number of accessories may vary depending on which
model is purchased.
Other accessories can be purchased separately from the
After-sales Service.
* If present.


Produkt Specifikationer

Mærke: Hotpoint
Kategori: Ovn
Model: SI4 854 C IX

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint SI4 854 C IX stil et spørgsmål nedenfor, og andre brugere vil svare dig