Hotpoint SI7 871 SC IX Manual

Hotpoint Ovn SI7 871 SC IX

Læs gratis den danske manual til Hotpoint SI7 871 SC IX (12 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Hotpoint SI7 871 SC IX, eller vil du spørge andre brugere om produktet?

Side 1/12
1
EN
PRODUCT DESCRIPTION
DAILY REFERENCE
GUIDE
CONTROL PANEL
Read the safety instructions carefully before using the product
5
4
3
2
1
5
4
3
2
1
1
2
3
4
5
8
9
7
6
1. Control panel
2. Fan
3. Circular heating element
(non-visible)
4. Shelf guides
(the level is indicated on the
front of the oven)
5. Door
6. Upper heating element/grill
7. Lamp
8. Identification plate
(do not remove)
9. Bottom heating element
(non-visible)
1. ON/OFF
For switching the oven on and
off and for stopping an active
function.
2. AUTOMATIC FUNCTIONS
For scrolling through the list of
automatic functions.
3. BACK
For returning to the previous
settings menu.
4. MANUAL FUNCTIONS
For scrolling through the list of
manual functions.
5. DISPLAY
6. NAVIGATION BUTTONS
For changing the settings and
values of a function.
7. CONFIRMATION BUTTON
For confirming a selected function
or a set value.
8. START
For starting a function using the
specified or basic settings.
1 2 5 7 8
43 6
THANK YOU FOR PURCHASING A HOTPOINT
PRODUCT
To receive more comprehensive help and
support, please register your product at
www.hotpoint.eu/register
You can download the Safety Instructions
and the Use and Care Guide by visiting
our website
www.hotpoint.eu and following the
instructions on the back of this booklet.
WWW
2
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
REMOVING AND REFITTING THE SHELF GUIDES
. To remove the shelf guides, lift the guides up and
then gently pull the lower part out of its seating: The
shelf guides can now be removed.
. To refit the shelf guides, first fit them back into
their upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating.
ACCESSORIES WWW Download the Use and Care Guide from
www.hotpoint.eu for more information
WIRE SHELF DRIP TRAY BAKING TRAY SLIDING RUNNERS
GRILLING KIT
FITTING THE SLIDING RUNNERS
Remove the shelf guides from the oven and remove
the protective plastic from the sliding runners.
Fasten the upper clip of the
runner to the shelf guide
and slide it along as far as it
will go. Lower the other clip
into position.
To secure the runner in place,
push the lower part of the
clip firmly against the shelf
guide. Make sure that the
runners can move freely.
Repeat these steps on the
other shelf guide on the
same level.
Please note: The sliding runners can be tted on any level.
The number of accessories may vary depending on which
model is purchased.
Other accessories can be purchased separately from the
After-sales Service.


Produkt Specifikationer

Mærke: Hotpoint
Kategori: Ovn
Model: SI7 871 SC IX

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint SI7 871 SC IX stil et spørgsmål nedenfor, og andre brugere vil svare dig