Hotpoint UH8 F1C G UK Manual

Hotpoint Fryser UH8 F1C G UK

Læs gratis den danske manual til Hotpoint UH8 F1C G UK (1 sider) i kategorien Fryser. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Hotpoint UH8 F1C G UK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

ALARMS TABLE

ALARMS TYPE Signal Cause Cure

Door open alarm The acoustical alarm is activated and the Alarm Indicator blinks. The door has remained open for more than 2 minutes. Close the door or press the Stop Alarm to mute the acoustical alarm.

Temperature alarm The Temperature display blinks (°C) and the Alarm Indicator remains on. The inside temperature is not adequate. Press the Stop Alarm button ; the acoustical alarm stops, the Temperature Display (°C)

blinks and the Alarm Indicator remains on until a temperature < -10°C is reached.

Long Black-Out alarm

The Black Out Alarm icon remains on, the Alarm indicator blinks and the

Temperature display (°C) blinks, showing the maximum temperature reached during

blackout.

Prolonged power failure, able to cause the inside temperature to increase to 0°C. Press the Stop Alarm button ; the acoustical alarm stops, the Temperature Display (°C)

blinks and the Alarm Indicator remains on until a temperature < -10°C is reached.

Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.

Read the Instructions for Use carefully before

using the appliance.

19514479400

QUICK START GUIDE

Printed in Italy 04/16- Whirlpool

TEMPERATURE DISPLAY

ON/STANDBY button

To put the product in Stand-by, press and hold for 3 seconds. All the icons

turn off except On/Standby indicator . To reactivate the appliance

press once (briefly) this button.

ECO NIGHT (NIGHT TIME RATE) / FUNCTION

FREEZE CONTROL button

Eco Night Function

Press to activate/deactivate the Eco Night function.

The Eco Night function enables appliance energy

consumption to be concentrated in the reduced rate

hours, generally at night (see the Instructions for Use).

TEMPERATURE SETTING button

The appliance is normally factory-set for operation at the

recommended temperature of -18°C. The internal temperature

can be adjusted between -16°C and -24°C, proceeding as

follows:

• Press to change the set point (°C). The storage temperature

can be changed by -1°C with each pressure of the button: the

value changes cyclically between -16°C and -24°C.

FAST FREEZE button

To activate/deactivate the Fast Freeze function simply

press Fast Freeze button (see the Instructions for Use).

The Fast Freeze function switches off automatically after

50 hours.

BLACK OUT ALARM

Long Black-out Alarm indicator. (see

the Instructions for Use)

1. Control panel *

2. Light (LED system) *

3. Ice packs*

4. Ice Mate* or Ice tray*

5. Drawer divider*

6. Bottle rack*

7. Glass shelves

8. Rating plate with commercial name *

9. Door reversibility kit *

10. Area for freezing fresh food or to store

frozenfood

11. Area for storing frozen foods

12. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts

the operation automatically. After starting the

appliance, wait at least 4-6 hours before placing food

into the appliance. When the appliance is connected

to the power supply, the display lights up and all

the icons appear on the display for approximately 1

second.

The default (factory) values of the freezer

compartment settings light-up.

HOW TO REVERSE DOOR SWING

- see enclosed Instructions for Use (Version_2)

Is recommended to reverse door swing by two

persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images

mayvary from model to model.

To receive the assistance call the number shown

on the warranty booklet or follow the instruction

on the web site www.hotpoint.eu

STOP ALARM button

Press in case of alarm (see the below Alarm Table).

PROFREEZE FREEZE CONTROL indicator

ProFreeze / Freeze Control is an advanced technology

that reduces freeze burns and food preserves its

original quality and color.

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Fryser
Model:	UH8 F1C G UK

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint UH8 F1C G UK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fryser Hotpoint Manualer

Hotpoint CS1A 250 H FA Manual

10 Juni 2025

Hotpoint HBNF55182SAQUAUK Manual

30 Januar 2025

Hotpoint UH8 F2C W Manual

12 December 2024

Hotpoint HABUFZ011 Manual

12 December 2024

Hotpoint HCM4SMWW Manual

11 Oktober 2024

Hotpoint UPS 1721_HA Manual

20 September 2024

Hotpoint E2BL 19213 F O3 (TK) Manual

2 September 2024

Hotpoint UH8 F1C G UK.1 Manual

1 September 2024

Hotpoint HBC18 5050 F1 Manual

22 August 2024

Hotpoint H7NT 911T W H 1 Manual

22 August 2024

Fryser Manualer

Nyeste Fryser Manualer

Curtis FRF434 Manual

17 Juni 2025

Liebherr SUFNh 3653 Prime Manual

17 Juni 2025

Liebherr UF3651 Manual

17 Juni 2025

Premium Levella PFR1090G Manual

17 Juni 2025

Perfect Fry PFA730 Manual

17 Juni 2025

Premium Levella PFR740G Manual

17 Juni 2025

Severin FR 2462 Manual

17 Juni 2025

Miroil 55HD Manual

16 Juni 2025

True T-23F-2-HC Manual

16 Juni 2025

Pitco SSHLV14 Manual

16 Juni 2025