Huawei E2010 Manual

Huawei USB dongle E2010

Læs gratis den danske manual til Huawei E2010 (2 sider) i kategorien USB dongle. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Huawei E2010, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Thank you for choosing the Mobile Broadband USB

Modem. With your USB Modem, you can access a

wireless network at high speed.

Note:

This manual describes the appearance of the USB Modem, as well as the procedures for

preparation, installation, and removal. For operation details about the management

program, see the online help included in the management program.

Getting to Know Your USB Modem

The following figure shows the appearance of the USB Modem. It is provided only for your

reference. The actual product may be different.

n Strap Hole

You can tie a strap to the USB Modem through the strap hole.

o Push Button

You can press the push button to open the USB Modem Cover.

p Indicator

It indicates the status of the USB Modem.

z Green, blinking twice every 3s: The USB Modem is powered on.

z Green, blinking once every 3s: The USB Modem is registering with a 2G network.

z Blue, blinking once every 3s: The USB Modem is registering with a 3G/3G+ network.

z Green, solid: The USB Modem is connected to a 2G network.

z Blue, solid: The USB Modem is connected to a 3G network.

z Cyan, solid: The USB Modem is connected to a 3G+ network.

z Off: The USB Modem is removed.

q USB Connector

It connects the USB Modem to a PC.

r Bolt

It holds the USB Connector when the USB Modem Cover is closed.

s SIM/USIM Card Slot

It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM)

card.

t MicroSD Card Slot

It holds a microSD card.

Getting Your USB Modem Ready

1. 1. Press the push button and then open the USB Modem Cover.

2. 2. Insert the SIM/USIM card and the microSD card into the corresponding card slots, as

shown in the following figure.

3. 3. Close the USB Modem Cover.

Note:

z The microSD card is an optional accessory. If it is not provided in the package, you can

buy one yourself.

z Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the

SIM/USIM card slot and the microSD card is inserted according to the direction as

labeled on the microSD card slot.

z Do not remove the microSD card or SIM/USIM card when the card is in use. Otherwise,

the card as well as your USB Modem may get damaged and the data stored on the card

may be corrupted.

Installation/Removal Guide

The procedure for installing the management program depends on the operating system

(OS) installed on your PC. The following sections take Windows XP as an example.

Connecting the USB Modem to a PC

Plug the USB Modem into the USB port of your PC.

Installing the USB Modem Management Program

1. 1. Connect the USB Modem with the PC.

2. 2. The OS automatically detects and recognizes the new hardware and starts the

installation wizard.

Note:

If the auto-run program does not respond, find the AutoRun.exe

AutoRun.exe

AutoRun.exeAutoRun.exe file in the driver path.

Then double-click AutoRun.exe

AutoRun.exe

AutoRun.exeAutoRun.exe to run the program.

3. 3. Follow the on-screen instructions of the installation wizard.

4. 4. After the program is installed, a shortcut icon for the management program appears on

the desktop.

Starting the Management Program

After being installed, the management program starts automatically. Then every time the

USB Modem is connected to the PC, the management program starts automatically.

You can also double-click the shortcut icon on the desktop to start the management

program.

Removing the USB Modem

1. 1. Double-click in the notification area. Then the Unp

Unp

UnpUnplug or Eject Hardwa

lug or Eject Hardwa

lug or Eject Hardwalug or Eject Hardware

rere dialog

box appears.

2. 2. Select the corresponding hardware and then click Stop

Stop

StopStop.

3. 3. When the message "It is safe to re

It is safe to re

It is safe to reIt is safe to remove the device

move the device

move the devicemove the device" appears, remove the USB Modem.

Uninstalling the Management Program

1. 1. Choose Star

Star

StarStart

tt > Control Panel

Control Panel

Control PanelControl Panel

> Add or Remove Programs

Add or Remove Programs

Add or Remove ProgramsAdd or Remove Programs .

2. 2. Find the management program and click Remove

Remove

RemoveRemove to uninstall the management

program.

Note:

Exit the management program before uninstalling it.

Version: V100R001_01 Part Number: 31010CMD

Produkt Specifikationer

Mærke:	Huawei
Kategori:	USB dongle
Model:	E2010

Har du brug for hjælp?

Hvis du har brug for hjælp til Huawei E2010 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

USB dongle Huawei Manualer

Huawei E156 Manual

1 December 2023

Huawei B593u-501 Manual

23 December 2022

Huawei E176 Manual

1 December 2022

Huawei E3372h-320 Manual

17 November 2022

Huawei E8372h-153 Manual

11 November 2022

Huawei B593s-22 Manual

11 November 2022

Huawei E2010 Manual

13 Oktober 2022

USB dongle Manualer

Nyeste USB dongle Manualer

Xiaomi TV Stick 4K Manual

11 Marts 2025

CGV My Mirror 3 Manual

1 August 2024

Alcatel LinkKey IK40V Manual

25 November 2023

Gembird SMP-TVD-002 Manual

3 November 2023

Nedis WSNWM300BK Manual

25 September 2023

Ubiquiti Networks UniFi Cloud Key G2 Plus Manual

24 August 2023

Ubiquiti Networks UniFi Cloud Key G2 Manual

1 August 2023

Marmitek GigaView 911 UHD Manual

23 Marts 2023

Alcatel LinkKey IK41 Manual

7 Marts 2023

Yealink WF40 Manual

11 Februar 2023