Huawei WS880 Manual

Huawei Router WS880

Læs gratis den danske manual til Huawei WS880 (2 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Huawei WS880, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

12345

1Obtaining More Information

Thanks for purchasing the WS880 802.11ac Wireless Router (WS880 for short).

This quick start will show you how to connect your WS880 to a network and access the

Internet. The figures in this guide are for reference only. The appearance and display

features may vary slightly depending on the actual product version.

For the full user guide, visit http://www.huaweidevice.com. Enter

WS880 in the website

search box and press Enter.

Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated

hotline and email address in your country or region.

2Connecting Cables

Connect your devices in the sequence indicated in the following gure.

POWER

LAN

RESET

ADSL

USB 3.0

4 5

A Phone

B Tablet

C Laptop

D Computer

E WS880

F Modem

G Telephone

H Telephone wall

jack

I Splitter

Packing list:

1 x WS880, 1 x power adapter, 1 x network cable, 1 x Quick Start and 1 x Warranty Card.

When con guring the WS880 for the rst time, use a network cable to connect the  

WS880 to a computer.

3Powering On

After the WS880 power adapter is plugged into a wall-mounted power outlet:

• Touch the icon to turn all the indicators off or on.

• Touch and hold the icon for more than 2 seconds to power the WS880 off or on.

4Setting the Computer IP Address

The following example uses Windows 7 to describe how to set the computer IP address:

The following example uses Windows 7 to describe how to set up a wireless connection:

1. Open a browser. In the address box, enter http://mediarouter.home. Press Enter.

Enter the login user name (

admin by default) and password (admin by default). Click

2. On the Home tab, click Connect to The Internet

. Then select a network connection

type and set network parameters based on the network provided by your Internet

service provider.

3. On the Home tab, click Connect to Internet by WLAN

, set WLAN parameters, Click

Save to complete the con guration.

To protect against unauthorized access, change your user name and password

after the rst login.

You can choose Connect automatically

, WS880 will automatically select the

network connection type.

To obtain the default SSID and key, check the label on the rear panel. To

better secure your WLAN, promptly change the SSID and key.

5Quick Setup

3. D ou b l e - cl ic k I n t e r n e t P ro t o c o l

Version 4 (TCP/IPv4).

1. C h oo se Start > Co n t rol Panel >

Network and Internet > Network

a n d Sh a r i n g C e n t e r > C h a n g e

adapter settings

. Right-click Wireless

Network Connection , an d choo se

Connect / Disconnect

1. C h oo se Start > Control Panel >

Network and Internet > Network and

Sharing Center

2. From the wireless network list, select

the WLAN provided by the WS880.

Click Connect.

2. Choose Change adapter settings

Right-click Local Area Connection

and choose Properties.

4. S e l e c t O b t a i n a n I P a d d r e s s

automatically

and Obtain DNS server

address automatically

. Click OK.

Indicator Expected State

Starting up Working

USB Steady off

• Steady off (No USB device connected to the USB port)

• Steady on (USB device connected to the USB port)

LAN Steady on • Steady off (No LAN port connected to a computer)

• Steady on (any of the LAN1 to LAN4 ports connected to a computer)

INTERNET Steady on

• Steady off (WAN port not connected to a network)

• Steady on (WAN port connected to a network)

• Blinking (WAN interface is connecting to the network)

WLAN Steady on

• Steady off (WLAN enabled)

• Steady on (WLAN disabled)

Press the WLAN button (more than 3 seconds) to enable/disnable WLAN.

WPS Steady off

• Steady off

(WPS disabled)

• Blinking (WPS enabled

)

Press the WPS button(less than 3 seconds) to start WPS negotiation.

Steady on

• Steady off (WS880 powered off)

• Steady on (WS880 powered on)

With all the cables connected, plug the power adapter into the wall-mounted power outlet

to power on the WS880. After the WS880 is powered on, the WS880 indicator turns on.

The following table lists how the indicators behave when the WS880 is operating correctly.

If the indicators do not behave as expected, ensure that everything is plugged in correctly.

6Wireless Connection Setup

• After the SSID and key had been changed, your computer should use the new

ones to establish a wireless connection to the WS880.

• By default, WLAN has enabled. When you don't use it, you can press the WPS/

WLAN button (more than 3 seconds) to disnable/enable WLAN.

Use the QR code scanner on your Android-based phone or tablet to scan the

QR code on the security token card that pulls out from the top of the WS880.

Enter RuMate in the search box to download the Huawei RuMate software.

With Huawei RuMate installed, your phone or tablet is ready to manage and

congure your WS880.

To use this function, your phone or tablet must have a QR code scanner installed.

If your phone or tablet is running iOS or Windows Mobile, download Huawei RuMate from the App

Store or Windows Phone Store.

You can use your phone or tablet to manage and con gure your WS880. To do so:

7QR Code Scanning

3. In the displayed dialog box, enter the

WLAN key and click OK.

4. I n th e w ir eless ne twork list, c he ck

t h e W L A N c o n n e c t i o n s t a t u s .

If t h e s t a t us i s C o n n e c t e d, t h e

computer is wirelessly connected to the

WS880.

Produkt Specifikationer

Mærke:	Huawei
Kategori:	Router
Model:	WS880
Bredde:	270 mm
Dybde:	34 mm
Højde:	150 mm
Vægt:	790 g
Produktfarve:	Hvid
Produkttype:	Bordplade router
Generering af mobilnetværk:	4G
USB-port:	Ja
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Ethernet LAN-porte (RJ-45):	5
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	1
Ethernet LAN:	Ja
Wi-Fi-standarder:	Wi-Fi 5 (802.11ac),Wi-Fi 4 (802.11n)
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	WEP,WPA,WPA2,WPA2-PSK
Ethernet WAN:	Ja
3G/4G kompatibilitet USB-modem:	Ingen
Wi-Fi-bånd:	Dual-band (2,4 GHz / 5 GHz)
Bedste Wi-Fi standard:	Wi-Fi 5 (802.11ac)
WLAN dataoverførselshastighed (maks):	1750 Mbit/s
WLAN dataoverførselshastighed (første bånd):	1300 Mbit/s
WLAN dataoverførselshastighed (anden bånd):	450 Mbit/s
Kabelteknologi:	10/100/1000Base-T(X)
Netværksstandarder:	IEEE 802.11ac,IEEE 802.11n
3G:	Ingen
4G:	Ingen
Antennedesign:	Intern
Firewall:	Ja
DoS angrebsforebyggelse:	Ja
IP-adresse filtrering:	Ja
Filtrering:	Ja
Strømkilde type:	DC
Udgangsspænding:	12 V
Udgangsstrøm:	3 A
Filtrering af MAC-adresser:	Ja