Hughes & Kettner CF200 Manual

Hughes & Kettner Ikke kategoriseret CF200

Læs gratis den danske manual til Hughes & Kettner CF200 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Hughes & Kettner CF200, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
GUITAR- PA STEREO POWER AMPLIFIER
Hughes
Kettner Musical Instruments
Magdeburgerstr.6 6690
Telefon
(
0
68
20
21
Telefax
0
68
48 86
We are pleased you chose
the
CF 200
power
amplifier. Its innovative CURRENT
FEEDBACK circuitry is the ideal medium for
the
modern guitar rack. The CF 200
is equally suitable for
PA, monitor, and keyboard applications.
PLEASE READ THE FOLLOWING GUIDELINES PRIOR TO OPERATING THE CF 200:
l The European model’s voltage can be adjusted from 220 V to 240 V.
l To avoid overheating, ensure sufficient air circulation is available both at the
sides and to the rear of the CF 200.
l Do not install any units sensitive to heat, for instance effects processors, directly
above the CF 200.
l Never expose the CF 200 to climatic extremes and ensure the amp is always
protected
from moisture.
l To protect your speakers, always switch the CF 200’5 power on last.
l Service and repair work should be left to an authorized repair shop. Before
opening the housing, always ensure the mains power cable is unplugged!
FRONT PANEL CONTROL FEATURES
(
1 ) The VOLUME LEFT and VOLUME RIGHT knobs regulate input sensitivity and
subsequently the power output. In the BRIDGE MODE, only the right control is
activated.
The green -20
db LED ( 2
)
indicates the signal level at the respective input is
correctly adjusted. The red CLIP LED
(
3 ) denotes the signal level is too high, and
the CF 200 is clipping. Adjust the appropriate VOLUME knob so that the red LED
illuminates at impulse peaks only.
(
4
)
GUI TAR/P A
The GUITAR/PA switch activates the CURRENT FEEDBACK circuitry (GUITAR mode
=
on, PA
=
off). The CURRENT FEEDBACK circuitry elicits an amp, producing the
type of signal most desirable for guitar amplification.
( 5
)
MAINS: The MAINS power switch illuminates when engaged.
page
7

Produkt Specifikationer

Mærke: Hughes & Kettner
Kategori: Ikke kategoriseret
Model: CF200

Har du brug for hjælp?

Hvis du har brug for hjælp til Hughes & Kettner CF200 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Hughes & Kettner Manualer

Hughes & Kettner

Hughes & Kettner ATTAX Manual

4 Juli 2025
Hughes & Kettner

Hughes & Kettner Attax 100 Manual

4 Juli 2025
Hughes & Kettner

Hughes & Kettner Edition 1 Manual

4 Juli 2025
Hughes & Kettner

Hughes & Kettner Edition Blue 15 Manual

4 Juli 2025
Hughes & Kettner

Hughes & Kettner BassKick 515 Manual

3 Juli 2025
Hughes & Kettner

Hughes & Kettner BassKick 111 Manual

3 Juli 2025
Hughes & Kettner

Hughes & Kettner Access Manual

3 Juli 2025
Hughes & Kettner

Hughes & Kettner Edition Silver 50 Manual

3 Juli 2025
Hughes & Kettner

Hughes & Kettner Tube Rotosphere MKII Manual

18 Juni 2025
Hughes & Kettner

Hughes & Kettner Switchblade 50 Combo Manual

18 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM

IFM SU9030 Manual

13 September 2025
IFM

IFM O2U554 Manual

13 September 2025
Speco Technologies

Speco Technologies HTi70TM Manual

13 September 2025
QSC

QSC RMXa Manual

13 September 2025
Tineco

Tineco Floor One S2 Series Manual

13 September 2025
Tineco

Tineco Floor One S3 Breeze Manual

13 September 2025
Tineco

Tineco Floor One S5 Steam Manual

13 September 2025
Osram

Osram VX500-CB Manual

13 September 2025
Zelmer

Zelmer ZTS7990 Manual

13 September 2025
Osram

Osram VX250-SP Manual

13 September 2025