Hughes & Kettner FSM-432 MKIII Manual

Hughes & Kettner Guitar forstærker FSM-432 MKIII

Læs gratis den danske manual til Hughes & Kettner FSM-432 MKIII (36 sider) i kategorien Guitar forstærker. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Hughes & Kettner FSM-432 MKIII, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/36

Manual 1.2

• English • Deutsch • Français • Italiano • Español • にほんご • 中文

中文

中文中文

1 General

The development of the Hughes & Kettner FSM-432 MK III

is based on the FSM-432 MK II which you might know if

you have ever used the Hughes & Kettner SwitchBlade

or CoreBlade. Optimised for the Hughes & Kettner

GrandMeister 36, the MK III version however offers all

functions of the FSM-432 MK II, so it can be used not only

for GrandMeister 36, but also for SwitchBlade, CoreBlade,

and TubeMeister 36

Like its forerunner, the FSM-432 MK III comes with a

7-pin MIDI cable. Used with one of the above-mentioned

Hughes & Kettner amps (SwitchBlade, CoreBlade,

TubeMeister 36, GrandMeister 36), you do not need an

external power source for the FSM-432, because phantom

power is provided through the amp’s 7 pin MIDI In socket.

If you wish to use a 5-pin MIDI cable, you will however

need a wall wart. For such cases, the FSM-432 provides an

innovative mains port that accepts any AC or DC adapter

rated for 9 to 15 volts and providing at least 250 mA.

If the FSM-432 MK III is connected correctly, it will run

through the following starting sequence, once switched

on: The display shows the version number, all LEDs light

up from left to right. After this, the display will either

change to “1”, if the FSM-432 is in Preset Mode or “Sb”, if

the FSM-432 is in Stompbox Mode (read more about the

two modes and their functions in section 3.1). The LED

below the button A lights up continuously in both modes.

The FSM-432 is now ready to operate.

2 Handling Basics of the FSM-432

Those who know the MK II version of the FSM-432 can

skip this section and continue reading in chapter 3. If

you don’t know the FSM-432 yet, please read these

instructions carefully to learn more about the handling

basics of all FSM-432 versions.

To date, the FSM-432’s main function was selecting

presets stored in the above-mentioned Hughes & Kettner

amps. All of these amps offer 128 memory slots arranged

in 32 banks of four presets each. The preset buttons A,

B, C, D as well as the Bank Up/Down buttons serve to

select presets.

2.1 The preset buttons A, B, C, D

Presets within a bank activate directly, that is, you can

switch straight from A to B within the same bank. The

LEDs above respectively below the A, B, C, and D buttons

indicate the selected preset.

2.2 Bank Up/Down

The FSM-432’s display always shows the currently

selected bank number. To access a preset in another bank,

select the target bank using the Up and Down buttons.

You can continue playing with the current preset while

you’re navigating. The display of the FSM-432 shows the

banks number; it flashes until you select a preset in the

target bank by pressing A, B, C, or D. The FSM-432 will

not switch over to the new preset until you do this.

Direct Mode

Direct Mode lets you trigger a direct program change via

Bank Up/Down. In this mode, the FSM 432 will not wait

for your input by way of the A, B, C, or D buttons, instead

switching directly, for example, from preset B in bank 16

to preset B in bank 17 (Up) or bank 15 (Down). Here’s how

to activate Direct Mode:

• Press and hold TAP, and then press Preset A.

• First release Preset A, and then TAP. The decimal point

in the display lights up.

Follow the same sequence to deactivate Direct Mode.

Note that it is a volatile rather than a permanent mode.

FSM-432 automatically reverts to standard mode when

you switch the amp off.

2.3 Tap

SwitchBlade, CoreBlade and GrandMeister 36 come

with an FX module including delay. When the delay is

activated, the FSM-432’s Tap button offers you a quick,

Produkt Specifikationer

Mærke:	Hughes & Kettner
Kategori:	Guitar forstærker
Model:	FSM-432 MKIII

Har du brug for hjælp?

Hvis du har brug for hjælp til Hughes & Kettner FSM-432 MKIII stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Guitar forstærker Hughes & Kettner Manualer

Hughes & Kettner Spirit of Metal Nano Manual

18 December 2024

Hughes & Kettner Spirit of Rock Nano Manual

18 December 2024

Hughes & Kettner Spirit of Vintage Nano Manual

18 December 2024

Hughes & Kettner Spirit Nano Series Manual

31 August 2024

Hughes & Kettner Tubeman MKII Manual

24 August 2024

Hughes & Kettner TubeMeister RM-20 Manual

24 August 2024

Hughes & Kettner FSM-432 MKIII Manual

24 August 2024

Hughes & Kettner GrandMeister RM-40 Manual

24 August 2024

Hughes & Kettner Tube Factor Manual

23 Juli 2024

Guitar forstærker Manualer

Nyeste Guitar forstærker Manualer

Marshall JVM410H Manual

11 Januar 2025

Blackstar CabRig Manual

9 Januar 2025

Blackstar ID:CORE Stereo 10 V4 Manual

9 Januar 2025

Boss KATANA-MINI X Manual

8 Januar 2025

Hartke HD50 Manual

29 December 2024

Mooer Envelope Manual

29 December 2024

Mooer Liquid Manual

29 December 2024

Orange Terror Bass Manual

27 December 2024

API Audio Tranzformer GT Manual

25 December 2024

API Audio Tranzformer LX Manual

25 December 2024