Conformity certificates.............................................. 2
Introduction............................................................... 2
Safety........................................................................6
Operation................................................................ 10
Maintenance........................................................... 15
Troubleshooting...................................................... 27
Transportation, storage and disposal......................29
Technical data.........................................................31
Service.................................................................... 32
Appendix ................................................................ 69
Conformity certificates
Conformity certificates
Conformity certificates
Conformity certificatesConformity certificates
Conformity requirements
Conformity requirements
Conformity requirements
Conformity requirementsConformity requirements
Labels are placed on the engine and/or in the
engine compartment stating that the machine will
fulfill the requirements. Do not remove these labels.
Certificates can also be supplied with the machine at
delivery or written in the Engine manual. Take care
of them as they are valuable documents.
To implement improvements, specifications and
designs can be altered without prior notification.
Introduction
Introduction
Introduction
IntroductionIntroduction
Pre-delivery inspection and product
Pre-delivery inspection and product
Pre-delivery inspection and product
Pre-delivery inspection and productPre-delivery inspection and product
numbers
numbers
numbers
numbersnumbers
A pre-delivery inspection has been done of this
product. Make sure that you receive a signed copy
of the pre-delivery inspection document from your
dealer.
Service agent contact information:
This operator’s manual is for product with product number / serial number:
/
Engine:
Transmission:
The product numbers are found on the type plate.
Refer to
Product overview on page 3
for the
location of the type plate.
Product description
Product description
Product description
Product descriptionProduct description
This product is a stand on / walk behind lawn mower.
The control levers let the operator steer the product
and adjust the speed of the product. An hour meter
shows how many hours the product has been used.
Intended use
Intended use
Intended use
Intended useIntended use
The product is made to cut grass on open and level
ground only. Do not use the product for other tasks.
2
2
2
22 2375 - 005 - 17.07.2024
