Preface
About the user manuals
There are 3 sets of operating instructions as follows.
• Operating Instructions (this document): Explains how to perform the settings and how to operate this
camera.
• Important Information: Provides information about “Precautions for use” and “Detail specifications”.
• Installation Guide: Provides information about “Precautions”, “Precautions for installation” and the
installation method.
The screens used in these operating instructions show the case of WV-S8574L. Depending on the model used,
the screens shown in the explanations may differ to the actual camera screens.
This document provides how to operate and configure the camera using a web browser but it is recommended
to use the iPRO Configuration Tool (iCT) to configure the camera. The iPRO Configuration Tool can configure
up to 1024 cameras at the same time so that the cameras can be configured efficiently. For information about
the i-PRO configuration tool (iCT) refer to our technical information website <Control No.: C0133>.
Note
• “Control No.:C****” used in this document should be used to search for information on our technical
information website below and will guide you to the right information.
https://i-pro.com/global/en/surveillance/training-support/support/technical-information
• The captured screens are used based on the guideline by Microsoft Corporation.
• Operations using Google Chrome is described in this document. For information about operation check
of the supported web browsers, refer to our technical information website <Control No.: C0132>.
• The default settings of some of the stream-related settings vary as follows depending on the language
setting of the browser selected at the time of administrator registration.
Setting items
Language of the browser
Languages other than
Japanese
Japanese
Transmission priority VBR Frame rate
Image quality 3 Normal
Stream(1)
-Max bit rate (per client)
6144kbps * 3072kbps *
Stream(2)
-Max bit rate (per client)
1536kbps * 768kbps *
About notations
The following notations are used when describing the functions limited for specified models.
The functions without the notations are supported by all models.
: The functions with this notation are available when using the model WV-S8574L and WV-S8573L.
: The functions with this notation are available when using the model WV-S8564L and WV-S8563L.
: The functions with this notation are available when using the model WV-S8544L and WV-S8543L.
: The functions with this notation are available when using the model WV-S8544 and WV-S8543.
2 Operating Instructions
Preface
