
stopper (in the direction
The watch must be serviced regularly in order for it to work correctly. The length of time between
services will vary depending on the model, climate and the care you take of your watch. As a
general rule, we recommend the following steps so that you can keep your watch in tip-top
condition for as long as possible.
- Temperature: avoid temperatures below 0°C (30°F) or above 35°C (100°F).
- Avoid prolonged exposure to sun, steam, contact with alcohol, detergents, perfume or
cosmetic products to prevent distorsion, discoloration or any damaging reaction.
- Do not use any watch button while under water to prevent water from entering the
The information contained in this document belongs to ICE Universal Ltd and may not be
reproduced without its authorisation.
1. Gently pull the winder out to the 1st position.
2. Turn the winder anticlockwise to set the date. If the date is set between around 9pm and
1am, it is possible that it will not change the next day.
3. Return the winder to its normal position.
1. Gently pull the winder out to the 2nd position.
2. Turn the winder to set the hour and minute hands to the correct positions.
3. The second hand starts again when the winder is pushed back into its normal position.
(the position of the date may vary
The symbol beside means that according to local laws and regulations
your product and/or its battery shall be disposed of separately from
household waste. When this product reaches its end of life, take it to a
collection point designated by local authorities. The separate collection
and recycling of your product and/or its battery at the time of disposal will
help conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment.