Ice Watch Chrono Manual

Ice Watch Ur Chrono

Læs gratis den danske manual til Ice Watch Chrono (8 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Ice Watch Chrono, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH

Getting started

Press

the winder.

Remove the plastic

stopper (in the direction

of the arrow).

Instructions

The watch must be serviced regularly in order for it to work correctly. The length of time between

services will vary depending on the model, climate and the care you take of your watch. As a

general rule, we recommend the following steps so that you can keep your watch in tip-top

condition for as long as possible.

- Temperature: avoid temperatures below 0°C (30°F) or above 35°C (100°F).

- Avoid prolonged exposure to sun, steam, contact with alcohol, detergents, perfume or

cosmetic products to prevent distorsion, discoloration or any damaging reaction.

- Do not use any watch or chronograph buttons while under water to prevent water from

entering the mechanism.

The information contained in this document belongs to ICE Universal Ltd and may not be

reproduced without its authorisation.

A) SETTING THE DATE

1. Gently pull the winder out to the 1st

position.

2. Turn the winder anticlockwise to set the

date. If the date is set between around 9pm

and 1am, it is possible that it will not change

the next day.

3. Return the winder to its normal position.

B) SETTING THE TIME

1. Gently pull the winder out to the 2nd

position.

2. Turn the winder to set the hour and minute

hands to the correct positions.

3. The second hand starts again when

the winder is pushed back into its normal

position.

C) USING THE CHRONOGRAPH

1. Press button A to start and stop the

chronograph (stop watch).

2. Press button B to re-set the chronograph.

D) CHOOSING THE CHRONOGRAPH’S

START POSITION

1. Gently pull the winder out to the 2nd

position.

2. Press button A to set the chronograph

second hand to the desired start position.

Hold down button A if you want to move the

chronograph hand forward quickly.

3. Return the winder to its normal position.

You should also use this procedure if the

chronograph hand does not return to its start

position after you press button B, as well as

when you replace the battery.

Second hand

Chrono minute hand

Minute hand

Button A

Button B

Chrono second hand

24 Hour Hand

1st position

2nd position

Normal winder position

Hour hand

Date

Produkt Specifikationer

Mærke:	Ice Watch
Kategori:	Ur
Model:	Chrono

Har du brug for hjælp?

Hvis du har brug for hjælp til Ice Watch Chrono stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Ice Watch Manualer

Ice Watch ICE Junior 3.0 Manual

19 August 2025

Ice Watch Generation Manual

16 August 2025

Ice Watch Smart Two 1.96 Manual

15 August 2025

Ice Watch Princess Manual

15 August 2025

Ice Watch Fit 1.78 Manual

15 August 2025

Ice Watch Smart Two 1.70 Manual

15 August 2025

Ice Watch Horizon Manual

15 August 2025

Ice Watch Cosmos Manual

15 August 2025

Ice Watch Tie And Dye Manual

12 August 2025

Ice Watch Smart 2.0 Rectangular Manual

20 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Swiss Military Hanowa Ace Chrono Manual

26 Oktober 2025

Swiss Military Hanowa Aerograph Night Vision Manual

26 Oktober 2025

Swiss Military Hanowa Afterburner Chrono Manual

26 Oktober 2025

Swiss Military Hanowa Nautica Manual

26 Oktober 2025

Swiss Military Hanowa Triton Automatic Manual

25 Oktober 2025

Casio G-Shock GW-9400 Manual

23 Oktober 2025

Spin Master Fleuss SP-5055-01 Manual

20 Oktober 2025

Spin Master SP-5034 Manual

20 Oktober 2025

Tommy Hilfiger George MWM1791214000 Manual

19 Oktober 2025

Seiko Tachymeter Manual

15 Oktober 2025