Iconbit FTB12000JS Jump Starter Manual

Iconbit power bank FTB12000JS Jump Starter

Læs gratis den danske manual til Iconbit FTB12000JS Jump Starter (6 sider) i kategorien power bank. Denne vejledning er vurderet som hjælpsom af 54 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 27.5 anmeldelser. Har du et spørgsmål om Iconbit FTB12000JS Jump Starter, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

FTB12000JS

Multi-Function Jump Starter

USER MANUAL

• Get to know your device

• Features

1. In case a car battery cannot start the car, this device can play the role

of emergency ignition.

2. High capacity of 12000mAh.

3. Built-in LED light and SOS signal function.

4. Power bank for laptops (19 V), tablet PCs (5V), MP3 / MP4,

mobile phones, portable game consoles etc.

5. Multiple safety protection system to ensure, devices' safety: protection

against overcharge, overvoltage, overcurrent and short circuit.

6. Small size, light weight, easy storage. The device is much more easy

to use compared to traditional electric cable.

• Specications

Battery Type:

Li-polymer

Battery Capacity:

12000mAh/44.4Wh

Input:

DC 19V/2A

Output:

DC 12V (for car)

DC 19V

USB 5V

Peak current:

200A

Size:

163 x 87 x 37.3mm

Weight:

500g

• Buttons

1. Power on/o

Short press Power button to turn the charge indicator on/o.

Note: The device will turn o automatically after 90 seconds of no-load.

2. “Flashlight” on/o

1) Long press Power key (3 sec) to turn ashlight on.

2) Repeat long press Power key (3 sec) to turn ashlight o.

3. “Lamp/SOS” on/o

1) Press shortly Lamp button to turn on rst level of brightness of

the lamp (maximum).

2) If this button is pressed again within 5 seconds, the second level

of brightness will turn on (medium).

3) Triple continuous pressing Lamp button starts the third level of

brightness (minimum).

4) To turn the lamp o, wait for 5 seconds, and then shortly press

Lamp button.

4. SOS signal on/o

1) Long press the Lamp button (3 sec) to turn SOS signal on.

2) Long press the Lamp button (3 sec) to turn SOS signal o.

• Car start

(Applied only to 12 V car battery)

1. Connect red clamp «+» to the positive contact of the car battery,

then connect black clamp «-» to the negative contact.

2. Connect mini Jumper clamps to the FTB12000JS 12V out.

(Disconnect the car battery if it is completely discharged).

3. Start up the ignition. According to experience, if engine doesn't

start after 3-5 seconds, please wait for 1 minute, and then repeat starting.

4. Disconnect mini Jumper clamps from the FTB12000JS.

5. Disconnect mini Jumper clamps from the car battery.

Charge your mobile phone:

1. Use original or standard USB cable to connect the device.

Charge your laptop or other devices (19V):

1. Choose the correct connector for laptop DC input port (19V).

2. Connect the power bank to laptop using the DC cable.

Warning:

• Never allow red and black clamps to touch each other or another

common metal conductor — this could cause damage to the unit

and/or create a sparkling/explosion hazard

• The product should be stored at temperatures above freezing to

prevent damage

• The unit is suitable for engine start up to 3 liters

• This system is designed to be used only on vehicles with a 12 V battery

system; do not connect to a 6 V or 24 V battery system

• It is necessary to disconnect the jump starter from the car battery

within 30 seconds after engine start

• Do not disassemble the device yourself. It may be dangerous

• Keep the device in dry place. Do not expose it to high temperatures

• Please fully charge the power bank at rst usage

• Keep the power bank away from children

• Please make a complete charge every four month to avoid shortening

life span

• Accessories:

1. AC Adapter

2. DC Cable

3. USB Cable

4. Battery clip

5. Notebook connectors

• Get to know your device

Lamp/SOS

Lamp button SOS

USB out

Flashlight

ON/OFF/Flashlight

DC out

DC in

OUTPUT INPUT

Battery clip

interface

• Features

1. In case a car battery cannot start the car, this device can play the role

of emergency ignition.

2. High capacity of 12000mAh.

3. Built-in LED light and SOS signal function.

4. Power bank for laptops (19 V), tablet PCs (5V), MP3 / MP4,

mobile phones, portable game consoles etc.

5. Multiple safety protection system to ensure, devices' safety: protection

against overcharge, overvoltage, overcurrent and short circuit.

6. Small size, light weight, easy storage. The device is much more easy

to use compared to traditional electric cable.

• Specications

Battery Type:

Li-polymer

Battery Capacity:

12000mAh/44.4Wh

Input:

DC 19V/2A

Output:

DC 12V (for car)

DC 19V

USB 5V

Peak current:

200A

Size:

163 x 87 x 37.3mm

Weight:

500g

• Buttons

1. Power on/o

Short press Power button to turn the charge indicator on/o.

Note: The device will turn o automatically after 90 seconds of no-load.

2. “Flashlight” on/o

1) Long press Power key (3 sec) to turn ashlight on.

2) Repeat long press Power key (3 sec) to turn ashlight o.

3. “Lamp/SOS” on/o

1) Press shortly Lamp button to turn on rst level of brightness of

the lamp (maximum).

2) If this button is pressed again within 5 seconds, the second level

of brightness will turn on (medium).

3) Triple continuous pressing Lamp button starts the third level of

brightness (minimum).

4) To turn the lamp o, wait for 5 seconds, and then shortly press

Lamp button.

4. SOS signal on/o

1) Long press the Lamp button (3 sec) to turn SOS signal on.

2) Long press the Lamp button (3 sec) to turn SOS signal o.

• Car start

(Applied only to 12 V car battery)

1. Connect red clamp «+» to the positive contact of the car battery,

then connect black clamp «-» to the negative contact.

2. Connect mini Jumper clamps to the FTB12000JS 12V out.

(Disconnect the car battery if it is completely discharged).

3. Start up the ignition. According to experience, if engine doesn't

start after 3-5 seconds, please wait for 1 minute, and then repeat starting.

4. Disconnect mini Jumper clamps from the FTB12000JS.

5. Disconnect mini Jumper clamps from the car battery.

Charge your mobile phone:

1. Use original or standard USB cable to connect the device.

Charge your laptop or other devices (19V):

1. Choose the correct connector for laptop DC input port (19V).

2. Connect the power bank to laptop using the DC cable.

Warning:

• Never allow red and black clamps to touch each other or another

common metal conductor — this could cause damage to the unit

and/or create a sparkling/explosion hazard

• The product should be stored at temperatures above freezing to

prevent damage

• The unit is suitable for engine start up to 3 liters

• This system is designed to be used only on vehicles with a 12 V battery

system; do not connect to a 6 V or 24 V battery system

• It is necessary to disconnect the jump starter from the car battery

within 30 seconds after engine start

• Do not disassemble the device yourself. It may be dangerous

• Keep the device in dry place. Do not expose it to high temperatures

• Please fully charge the power bank at rst usage

• Keep the power bank away from children

• Please make a complete charge every four month to avoid shortening

life span

• Accessories:

1. AC Adapter

2. DC Cable

3. USB Cable

4. Battery clip

5. Notebook connectors

Сharge indicator

Produkt Specifikationer

Mærke:	Iconbit
Kategori:	power bank
Model:	FTB12000JS Jump Starter

Har du brug for hjælp?

Hvis du har brug for hjælp til Iconbit FTB12000JS Jump Starter stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

power bank Iconbit Manualer

Iconbit FTB2600LED Manual

31 August 2024

Iconbit FTB7000DUO Manual

31 August 2024

Iconbit FTB5200U Manual

31 August 2024

Iconbit FTB12000JS Jump Starter Manual

31 August 2024

Iconbit FTB12000DUO Manual

31 August 2024

Iconbit FTB9000LED Manual

31 August 2024

Iconbit FTB13000DUO Manual

31 August 2024

power bank Manualer

Nyeste power bank Manualer

Bauhn ATAPB-0224 Manual

15 Oktober 2024

GoGen PB270001BL Manual

10 Oktober 2024

Einhell TE-CP 18 Li USB-Solo Manual

7 Oktober 2024

CyberPower CPBC10400 Manual

7 Oktober 2024

Fresh 'n Rebel 2PB3000CC Manual

7 Oktober 2024

Kogan KAPBCMPN50A Manual

1 Oktober 2024

Kogan KAPB05L20WA Manual

1 Oktober 2024

Voltcraft VC-C909 Manual

30 September 2024

Urban Factory BCA31UF Manual

30 September 2024

Urban Factory BCA35UF Manual

30 September 2024