ID-Tech MiniMag Manual

ID-Tech Ikke kategoriseret MiniMag

Læs gratis den danske manual til ID-Tech MiniMag (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om ID-Tech MiniMag, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
MINIMAG
Magnetic Stripe Reader
TTL
User’s Manual
TM
ID TECH
10721 Walker Street
Cypress, California 90630
(714) 761-6368
www.id-tech.net
80030501-005 Rev. A R02/05 #422
MINIMAG
Magnetic Stripe Reader
TTL
User’s Manual
TM
ID TECH
10721 Walker Street
Cypress, California 90630
(714) 761-6368
www.id-tech.net
80030501-005 Rev. A R02/05 #422
61
61
Agency Approved
Specifications for subpart B of part 15 of FCC rule for a Class A computing
device.
Limited Warranty
ID TECH warrants this product to be in good working order for a period of
one year from the date of purchase. If this product is not in good working
order as warranted above, or should this product fail to be in good working
order at any time during the warranty period, repair or replacement shall be
provided by ID TECH.
This warranty does not cover incidental or consequential damages incurred
by consumer misuse, or modification of said product. For limited warranty
service during the warranty period, please contact ID TECH to obtain an
RMA number and instructions for returning the product.
©2005 International Technologies & Systems Corporation. The information
contained herein is provided to the user as a convenience. While every effort
has been made to ensure accuracy, ID TECH is not responsible for damages
that might occur because of errors or omissions, including any loss of profit
or other commercial damage. The specifications described herein were cur-
rent at the time of publication, but are subject to change at any time without
prior notice.
ID TECH is a registered trademark of International Technologies & Systems
Corporation. MiniMag and Value through Innovation are trademarks of Inter-
national Technologies & Systems Corporation.
OPERATION
Make sure the reader is properly cabled and is receiving sufficient power. To
read a card, slide the card, in either direction, through the reader slot, with the
magnetic stripe facing the magnetic head.
ELECTRICAL CHARACTERISTICS
DC Electrical Characteristics (25° C)
Item Symbol Min. Typical Maximum Unit Condition
Supply Voltage VCC 2.6 5.5 V
Maximum ICC 1.1 per track mA IMDL =(VCC - VOL)/10K
Active Supply + IMDL
Current
Maximum 30 per track
Sleep Current I
SLEEP + IMDH A IµMDH=(VCC - VOH
)/10K
Minimum High VCC-0.03 V IOUT =50 Aµ
Level Voltage VOH 2.3 V IOUT =3mA, VCC=2.6V
5.25 V IOUT =6mA, VCC=5.5V
Maximum Low VOL 0.1 V I
OUT =50 A µ
Level Voltage 0.22 V I
OUT =3mA, VCC=2.6V
0.2 V IOUT =6mA, VCC=5.5V
Agency Approved
Specifications for subpart B of part 15 of FCC rule for a Class A computing
device.
Limited Warranty
ID TECH warrants this product to be in good working order for a period of
one year from the date of purchase. If this product is not in good working
order as warranted above, or should this product fail to be in good working
order at any time during the warranty period, repair or replacement shall be
provided by ID TECH.
This warranty does not cover incidental or consequential damages incurred
by consumer misuse, or modification of said product. For limited warranty
service during the warranty period, please contact ID TECH to obtain an
RMA number and instructions for returning the product.
©2005 International Technologies & Systems Corporation. The information
contained herein is provided to the user as a convenience. While every effort
has been made to ensure accuracy, ID TECH is not responsible for damages
that might occur because of errors or omissions, including any loss of profit
or other commercial damage. The specifications described herein were cur-
rent at the time of publication, but are subject to change at any time without
prior notice.
ID TECH is a registered trademark of International Technologies & Systems
Corporation. MiniMag and Value through Innovation are trademarks of Inter-
national Technologies & Systems Corporation.
OPERATION
Make sure the reader is properly cabled and is receiving sufficient power. To
read a card, slide the card, in either direction, through the reader slot, with the
magnetic stripe facing the magnetic head.
ELECTRICAL CHARACTERISTICS
DC Electrical Characteristics (25° C)
Item Symbol Min. Typical Maximum Unit Condition
Supply Voltage VCC 2.6 5.5 V
Maximum ICC 1.1 per track mA IMDL =(VCC - VOL)/10K
Active Supply + IMDL
Current
Maximum 30 per track
Sleep Current I
SLEEP + IMDH A IµMDH=(VCC - VOH
)/10K
Minimum High VCC-0.03 V IOUT =50 Aµ
Level Voltage VOH 2.3 V IOUT =3mA, VCC=2.6V
5.25 V IOUT =6mA, VCC=5.5V
Maximum Low VOL 0.1 V I
OUT =50 A µ
Level Voltage 0.22 V I
OUT =3mA, VCC=2.6V
0.2 V IOUT =6mA, VCC=5.5V

Produkt Specifikationer

Mærke: ID-Tech
Kategori: Ikke kategoriseret
Model: MiniMag

Har du brug for hjælp?

Hvis du har brug for hjælp til ID-Tech MiniMag stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret ID-Tech Manualer

ID-Tech

ID-Tech MiniMag Duo Manual

1 September 2024
ID-Tech

ID-Tech EconoWriter Manual

1 September 2024
ID-Tech

ID-Tech EzWriter Manual

1 September 2024
ID-Tech

ID-Tech MiniMag II Manual

1 September 2024
ID-Tech

ID-Tech EasyMag Manual

1 September 2024
ID-Tech

ID-Tech MiniMag Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet

Planet XGPN-100 Manual

15 Juni 2025
Proficook

Proficook PC-EKA 1283 Manual

15 Juni 2025
OmniMount

OmniMount OBSP8 Manual

15 Juni 2025
Levenhuk

Levenhuk FS10 Manual

15 Juni 2025
Vestil

Vestil PM4-2148-LP Manual

15 Juni 2025
ElectriQ

ElectriQ STRV-W1-B Manual

15 Juni 2025
Adler

Adler AD 4521 Manual

15 Juni 2025
AMX

AMX HydraPort HPX-AV102 Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025