IDIS DC-D4531WERX Manual

IDIS Overvågningskamera DC-D4531WERX

Læs gratis den danske manual til IDIS DC-D4531WERX (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om IDIS DC-D4531WERX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

DC-D Series

Installation Manual

• DC-D4511WERX

• DC-D4531WERX

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safeguards

1. Read Instructions

All the safety and ope ting instructions should be read before the ra

appliance is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future

reference.

3. Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do not

use liquid aerosol cleaners. Use a damp soft cloth for cleaning.

4. Attachments

Never add any attachments and/or equipment without the approval

electric shock or other personal injury.

5. Water and/or Moisture

Do not use this equipment near ter or in contact with water.wa

6. Placing and A essoriescc

Do not place this equipment on an wall or ceiling that is not strong

enough to sustain the camera. The equipment may fall, causing

serious injury to a child or adult, and serious damage to the

equipment. Wall or shelf mounting should follow the manuf acturer's

instructions, and should use a mounting kit approved by the

manufacturer.

This equipment and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

equipment and cart combination to overturn.

ventilation is required to prevent an increase in ambient tempe ture ra

7. Power Sources

This equipment should be ope ted only from the type of power ra

source indicated on the marking label. If you are not sure of the

type of power, please consult your equipment dealer or local power

company. You may want to install a UPS (Uninterruptible Power

Supply) system f or safe operation in order to prevent damage caused

by an unexpected power stoppage. Any questions concerning UPS,

consult your UPS retailer.

This equipment should be remain readily operable.

8. Power Cord

Ope tor or installer must remove power and TNT connections before ra

handling the equipme .nt

9. Lightning

For added protection for this equipment during a lightning storm,

or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the equipment due to lightning

and power-line surges. If thunder or lightning is common where the

equipment is installed, use a surge protection device.

10. Overloading

Do not overload wall outlets and extension cords as this can result in

11. Objects and Liquids

Never push objects of any kind through openings of this equipment

as they may touch dangerous voltage points or short out parts that

the equipme .nt

12. Servicing

Do not attempt to service this equipment yourself. Refer all servicing

13. Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to

A. When the power-supply cord or the plug has been damaged.

B. If liquid is spilled, or objects have hit the equipment.

C. If the equipment has been exposed to rain or water.

D. If the equipment does not operate normally by following the

operating instructions, adjust only those controls that are vered co

by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work

operation.

E. If the equipment has been dropped, or the cabinet damaged.

F. When the equipment exhibits a distinct change in performance —

this indicates a need for service.

14. Replacement Parts

When replacement parts are required, be sure the service technician

have the same characteristics as the original part. Unauthorized

15. Safety Check

Upon completion of any service or repairs to this equipment, ask the

service technician to perf orm safety checks to determine that the

equipment is in proper ope ting condition.ra

16. Field Installation

should conform to all local codes.

17. Correct Batteries

Warning: Risk of explosion if battery is replaced by an incorrect type.

Replace only with the same or equivalent type.

Dispose of used batteries according to the instructions.

The battery shall not be exposed to excessive heat such as sunshine,

18. Tmra

A manufacturer’s maximum recommended ambient tempe ture ra

installer may determine a suitable maximum ope ting environment ra

for the equipme .nt

Warning: This product emits infrared light. Do not look into the IR LED.

FCC Compliance Statement

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART

15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE

WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE

RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN A ORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE CC

HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO

CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.

WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID

THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE

CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

WEEE (Waste Electrical & Electronic Equipment)

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household

wastes at the end of its working life. To prevent possible harm to the environment or human health from

uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote

the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government

Business users should contact their supplier and check the terms and conditions of the purchase contract. This

product should not be mixed with other commercial wastes for disposal.

Upon purchasing the product, check inside the box to make sure all the following accessories are included.

External appearances and colors of the accessories may vary depending on the model.

Covered by one or more claims of the patents listed at patentlist.accessadvance.com

DC-D4511WERX DC-D4531WERX

Accessories

Overview

ITEM

Network Camera Guide Pattern

Quick Guide Screws and Anchors (each 3ea)

Pigtail Connector Insulator and Rubber Bushing

①Bottom Cover

②Low Pressure Ring

③

SD Memory Card Slot

Factory Reset Button

④Lens

⑤Built-in Microphone

⑥IR LED

⑦High Pressure Ring

⑧Network Port

⑨DC-12V

①Bottom Cover

②Low Pressure Ring

③SD Memory Card Slot

Factory Reset Button

④Lens

⑤IR LED

⑥High Pressure Ring

⑦DC-12V

⑧Audio Input

⑨Audio Output

⑩Network Port

⑪Alarm I/O

Safety Precautions

The software included in this product contains some Open Sources. You may obtain the corresponding source

code which we have to distribute according to the license policy. For more information, refer to stem > GeneralSy

page. This product includes software developed by the University of California, Berkeley and its contributors, and

software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http:// w.oepnssl.org/). Also, this ww

product includes cryptographic software written by Eric Young (eay@cryptsoft.com).

IDIS Co., Ltd. reserves all rights concerning this operation manual.

Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.

Contents of this operation manual are subject to change without prior notice for reasons such as functionality enhancements.

Registered Trademarks

IDIS is a registered trademark of IDIS Co., Ltd.

Other company and product names are registered trademarks of their respective owners.

2021

• Check the wall or ceiling to see if it needs to be

reinforced. The camera may fall o if the wall

or ceiling is not strong enough to support its weight.

• Install the camera in a shaded area. If the camera

is installed in direct sunlight, it may aect adversely.

• Use the provided guide pattern to check the

distance between the screw holes if necessary.

Only use the factory reset button to restore the

camera to its factory default settings.

1. Remove the cover of SD card slot and then

press the reset button down.

2. Hold the button down for 10 seconds.

3. All camera settings will be restored to their

factory defaults.

Remove the white paper of the provided

guide pattern and attach it to the wall or

ceiling.

The lens can be rotated along three axes.

Adjust the angles accordingly.

• An SLC (Single Level Cell) or MLC (Multi Level Cell) card by SanDisk or Transcend is recommended

to ensure stable recording performance.

• An SD memory card is a consumable product with a nite service life. Prolonged use will damage

the card’s memory sectors and result in data loss or memory card failure. Test the SD memory card

regularly and replace it whenever necessary.

• microSD Logo is a trademark of SD-3C, LLC.

Secure the low pressure ring to the body by

turning the ring clockwise completely.

After you insert the SD memory card in the

camera, secure the body on a wall or ceiling

using the screws, and anchors that came

with the camera.

Attach the low pressure ring to the bottom

cover. Turn the ring clockwise to hold the

camera body.

• Do not fasten the ring too hard till complet-

ing angle adjustment.

Remove the low pressure ring from the

camera bottom cover by rotating the ring in

anti-clockwise.

DC-D4511WERX / DC-D4531WERX

DC-D4511WERX

DC-D4531WERX

Installation Specications

Factory Reset Dimension

Setup Sticker

Expansion

Bolt

Locking

Screw

Model DC-D4511WERX DC-D4531WERX

Video

Image Sensor 1/2.7" CMOS

Max. Resolution 2592 x 1944

Scanning Mode Progressive Scan

Lens type Fixed-focal Motorized Vari-focal

Focal Length f=2.8mm f=2.7 - 12mm

Aperture F 1.6 F 1.83 (Wide) ~ 3.32(Tele)

Iris Control Fixed Iris DC Iris

Angular Field of View Wide 99°(H), 72°(V), 131°(D) 99°(H), 72°(V), 131°(D)

Min. Illumination Color 0.05lux @ F1.2 (AGC ON) , B/W 0 lux @ IR ON

Dynamic Range 120dB, True WDR

Electronic Shutter Speed 1/5 ~ 1/20000s, Anti-Flicker, Slow Shutter (1~1/5, 1/7.5, 1/15)

Day & Night IR cut lter with auto switch

IR Distance (LEDs) 25 m (2 ea) 45 m (4 ea)

Pan/Tilt Range Bracket: Pan 0-360°; Lens: Pan 0-360°, Tilt: 0-80°

Network

Video Compression H.265, H.264(MP)

Bit rate Control CBR / VBR

Max. Frame Rate 30ips : 2592×1944 (WDR)

Audio Compression G711A (G.711 a-Law), G711U (G.711 u-Law), ADPCM 16K, G726

Supported Resolution 2592×1944, 2592x1520, 2304x1296, 1920x1080, 1280x960, 1280x720

Multi-Video Streaming Triple

Ethernet RJ45(10/100BASE-T)

Edge Storage* (Optional) Micro SD/SDHC/SDXC memory card (class 6 or higher, max. 256GB)

I/O

Audio In/Out Internal MIC RCA 1ea / RCA 1ea

Alarm In - 1 switch input

Alarm Out - 0.5 A at 125 VAC/ 2A at 30 VDC

Video Out** - -

General

Operating Temperature -30°C ~ +55°C (-22°F ~ +131°F)

Operrating Humidity 0% ~ 90%

Power Source DC 12V, POE (IEEE 802.3af Class 3)

Power Consumption Max. 6.5W Max. 9W

Approval FCC, CE, IP66

External Dimensions(Ø x H) 90mm x Ø100mm (3.5” x Ø3.9”) Ø135.6mm x 127mm (Ø5.3” x 4.95”)

Weight(Main Unit) 0.53kg (1.17lb) 0.84kg (1.85lb)

Produkt Specifikationer

Mærke:	IDIS
Kategori:	Overvågningskamera
Model:	DC-D4531WERX

Har du brug for hjælp?

Hvis du har brug for hjælp til IDIS DC-D4531WERX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera IDIS Manualer

IDIS DC-D4532WERA-BLK Manual

13 August 2025

IDIS DC-T4537HRXA Manual

14 Juli 2025

IDIS DC-T4831HRX-A Manual

11 Juli 2025

IDIS DC-T4516WRX-A Manual

11 Juli 2025

IDIS DC-E4216WRX Manual

11 Juli 2025

IDIS DC-T4811WRX Manual

11 Juli 2025

IDIS DC-S6286HRXL-A Manual

11 Juli 2025

IDIS DC-T4238HRA Manual

10 Juli 2025

IDIS DC-S6281FX Manual

15 Juni 2025

IDIS TC-D5531RX Manual

6 April 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Dahua Technology N45EYN2 Manual

15 September 2025

Ipevo VC-Z4K Manual

15 September 2025

TP-Link Tapo C425 Manual

15 September 2025

Dahua Technology 1A404DBNR Manual

15 September 2025

AMX NMX-NVR-N6123 Manual

14 September 2025

Hanwha QNE-7080RV Manual

14 September 2025

Hikvision DS-2CD4125FWD-IZ Manual

14 September 2025

Intellinet 524421 Manual

13 September 2025

Intellinet INT-PSNC-UM-1106-07 Manual

13 September 2025

3xLOGIC VISIX Manual

13 September 2025