IFi Audio nano iGalvanic 3.0 Manual

IFi Audio Ikke kategoriseret nano iGalvanic 3.0

Læs gratis den danske manual til IFi Audio nano iGalvanic 3.0 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om IFi Audio nano iGalvanic 3.0, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Ver.1.1

1. USB3.0 'Type B' input port

For USB cable input from the computer audio source.

2. USB3.0 'Type A' output port

For USB cable to connect from iGalvanic3.0 to the DAC.

3. Ground Link®

As the iGalvanic3.0 is a dedicated high-performance audio

product, it is designed to work in different computer audio

systems:

No Earth (sub-optimal)

One Earth (optimal)

Multiple Earths (sub-optimal)

The Ground Link switch is to optimise isolation in systems

where:

• Full Isolation

(default – centre position). Start from this setting.

• DC to RF soft ground-link

(to avoid hum in systems without earth – up position)

• RF soft ground-link

(to avoid audio drop-outs in systems without RF earth –

down position)

Tip: Earth/ground loops are commonly found and this switch

deals with NO or Multiple Earths/Grounds. If you have

determined that your system has no Earth, it is recommended

that an Earth/Ground is added such as by using the

. Please see your nearest iFi retailer for more

details.

Tip: It is more preferable to use a USB 3.0 port over using a

USB 2.0 port on the PC. Make the connection between Audio

Device (DAC) and iGalvanic3.0 first before connecting the

iGalvanic3.0 to the Host PC. While this sequence is NOT

mandatory, it ensures correct detection.

Tip: When adding the iGalvanic3.0 to the USB chain under

Windows, it may be necessary to re-install a fresh version of

the USB Audio Driver.

Tip: The iGalvanic3.0 is powered by the Host PC via the USB

bus and has an ultra-clean 0.5uV stealth converter. There is no

benefit powering the iGalvanic3.0 with other power supplies.

7. LEDs

IN PU T

ifi-audio.com

iGalvanic3.0

ISO

DC -R F

GR OU ND

LINK

OU TP UT

GGal

alalv

vva

aan

nni

iic

c c

IIso

sosol

lla

aa



o

oon

3 2

Computer conected

USB3.0/2.0 conected

Specications:

Output Voltage:

Output Current:

Output Noise oor:

USB Standards:

Connector host-side:

Connector device-side:

Input Voltage:

Power consumption:

Electrical Safety Standard:

Isolation Device max Voltage:

Dimensions:

Weight:

Warranty period:

Specifications are subject to change without notice.

5V ± 3% @ 500mA load

900mA max.

0.5uV(0.0000005V) @ 500mA

load

USB 3.0 Super-speed 5.0Gbps

USB 2.0 Hi-speed 480Mbps

USB 2.0 Full-speed 12Mbps

USB 2.0 Low-speed 1.5Mbps

USB 3.0 B-Type

USB 3.0 A-Type

DC 4.5V to 5.5V USB Bus

Power

< 6W (includes powered USB

device)

BS 7671:2008 ELV

3000 Vrms Isolation Voltage

per UL 1577

93 (l) x 67 (w) x 28 (h) mm

128g (0.28lbs)

12months

Terms and Conditions

iFi guarantees that this iFi product shall be free from defects in materials and

workmanship for a period of 1 year for parts and labour.

The warranty period begins at the date of retail sale by an authorized iFi

distributor/dealer and is subject to the following requirements and

understandings:

• It is the responsibility of the buyer within 30 days from the original sale, to

• The original invoice must be produced for authentication prior to any

warranty claim.

• The iFi product must not have been modified in any manner whatsoever,

or the warranty will immediately become void.

• The iFi warranty is only valid in the country of original sale and is not

transferable.

• The product must not have been stored in a humid environment; nor

subjected to weather, water, or saltwater spray.

• iFi shall not, under any circumstances, be liable for any incidental or

consequential damages arising from the loss of property or other damage

or losses due to the failure of an iFi product. iFi is not liable for loss of use or

inconvenience caused by the failure of an iFi product. iFi is not liable for

damage caused to other audio components because of the failure of an iFi

product.

• During the warranty period, iFi will repair the product to working order, or,

at iFi's discretion, replace the defective module with a similar available

product.

• All repairs per formed after expiry of the warranty period will be charged to

the owner and will carry a 180-day warranty on parts and labour. The

customer is responsible for shipping the unit to the iFi distributor in the

original packaging. This includes the payment of any shipping charges and

related taxes.

• Should any warranty issues arise, iFi’s decision is full and final.

Produkt Specifikationer

Mærke:	IFi Audio
Kategori:	Ikke kategoriseret
Model:	nano iGalvanic 3.0

Har du brug for hjælp?

Hvis du har brug for hjælp til IFi Audio nano iGalvanic 3.0 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFi Audio Manualer

IFi Audio iEMatch4.4 Manual

13 Januar 2025

IFi Audio GO link Max Manual

13 December 2024

IFi Audio SupaNova Manual

18 September 2024

IFi Audio LAN iSilencer Manual

4 September 2024

IFi Audio iDSD Diablo 2 Manual

28 August 2024

IFi Audio NEO iDSD 2 Manual

27 August 2024

IFi Audio SPDIF iPurifier2 Manual

21 August 2024

IFi Audio Pro iDSD Manual

20 August 2024

IFi Audio Micro iDSD Signature Manual

20 August 2024

IFi Audio SPDIF iPurifier Manual

19 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 303676 Manual

16 Juni 2025

Playtive IAN 307527 Manual

16 Juni 2025

Playtive IAN 327441 Manual

16 Juni 2025

Xblitz G750 Pro Manual

16 Juni 2025

Playtive IAN 285603 Manual

16 Juni 2025

Playtive HG05646 Manual

16 Juni 2025

Milwaukee M12 IR Manual

16 Juni 2025

Blodgett Invoq 202BG Manual

16 Juni 2025

Aiphone GT-AD Manual

16 Juni 2025

Playtive IAN 113608 Manual

16 Juni 2025