IFM AY1000 Manual

IFM Ikke kategoriseret AY1000

Læs gratis den danske manual til IFM AY1000 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om IFM AY1000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

You can use this Quick Start for an overview of the AY1000 installation. For complete

installation and conﬁ guration information, download the device manual from the ifm.com

website.

Installation and connection

The device must be installed in a suitable housing protected against ﬁ re and electrical or

mechanical inﬂ uences.

Connect the power and Ethernet cables according to the following table

Terminals Description Voltage Range Remarks

V+, V-

24VDC

PWR IN

Power supply for modules and

sensors (A-ports via PWR Out

connectors)

18…30 V DC,

max. 4 A

Only use PWR connectors on one

side top OR bottom. Do not use

both at the same time.

L+, L-

PWR OUT

Port 1…8

Power supply (A-ports) for

sensors or actuators. Be aware

of the current limitations.

24 V DC,

max. 200 mA

If more current is needed for B-

port devices, take it directly from

the power supply.

Conﬁ guration

Conﬁ gure IP address

You can use the following procedure with the IO-Link master embedded web interface to

conﬁ gure the AY1000 network settings (administrative rights required).

Note: The AY1000 is shipped from the factory with the Admin account enabled without a

password.

►Open browser and enter IP address of the AY1000.

Note: The AY1000 default IP address is 192.168.1.250. You may need to change your

laptop or PC network address to the same network segment to access the web interface.

►Click on [Conﬁ guration] → [NETWORK].

►Click on the button [EDIT].

►Make any necessary network setting changes and click on [SAVE].

Connect and conﬁ gure devices

►Connect the IO-Link and digital I/O devices

►Use the web interface to conﬁ gure IO-Link and Proﬁ net-IO settings

– If necessary, conﬁ gure the dedicated digital I/O ports.

– If desired, upload the appropriate IODD ﬁ les for the IO-Link devices.

Operating instructions

IO-Link Master Proﬁ net AY1000

– If desired, conﬁ gure the IO-Link device parameters using the web interface.

– If desired, implement AY1000 features or options, such as: data storage mode, de-

vice validation mode, and data validation mode.

– Use the Diagnostics pages to monitor or troubleshoot the devices.

If desired, connect to a PLC.

Electrical connection

A qualiﬁ ed electrician must connect the unit. The national and international regulations for

the installation of electrical equipment must be adhered to.

Voltage supply to EN 50178, SELV, PELV or UL. The module must be supplied from only

one common voltage source.

The inputs and outputs are not electrically isolated.

►Disconnect power.

►Connect the device as follows; only one terminal block on the top or the bottom may be

connected.

Terminal connection top

LEDs

1: Terminal connection ext. voltage supply and IO-

Link ports 1,2,5,6

2: terminal connection and IO-Link ports 3,4,7,8

Ext. voltage supply

1: V_ext. voltage GND DC

2: V_ext. voltage GND DC

3: V_ext. voltage +24 V DC

4: V_ext. voltage +24 V DC

Terminal connection bottom

Internal voltage, inputs/outputs

1: L+ sensor supply +24 V DC

2: L- sensor supply GND DC

3: DI digital input DI

4: DO digital output DO

Terminal connection IO-Link ports

Ports 1…8

1: L+ sensor supply +24 V DC

2: L- sensor supply GND DC

3: DI digital input

4: C/Q IO-Link / DI / DO

IP address set at the factory: 192.168.1.250

7391082/00 02/2016 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen • Germany • http://www.ifm.com

Produkt Specifikationer

Mærke:	IFM
Kategori:	Ikke kategoriseret
Model:	AY1000

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM AY1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFM Manualer

8 Juni 2025

8 Juni 2025

7 Juni 2025

6 Juni 2025

9 April 2025

13 Marts 2025

10 Marts 2025

25 Januar 2025

25 Januar 2025

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Life On Products LCAEA011 Manual

16 Juni 2025

Philips TAT2719 Manual

16 Juni 2025

Life On Products LCAF001 Manual

16 Juni 2025

Playtive IAN 303900 Manual

16 Juni 2025

Planet Audio PC35B Manual

16 Juni 2025

Philips SCF205 Manual

16 Juni 2025

Enrock Marine EMC56W Manual

16 Juni 2025

Playtive IAN 115579 Manual

16 Juni 2025

Playtive IAN 425617 Manual

16 Juni 2025

Life On Products LCAF017 Manual

16 Juni 2025