IFM AY1020 Manual

IFM Ikke kategoriseret AY1020

Læs gratis den danske manual til IFM AY1020 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 6 anmeldelser. Har du et spørgsmål om IFM AY1020, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
You can use this Quick Start for an overview of the AY1020 installation. For complete
installation and confi guration information, download the device manual from the ifm.com
website.
Installation and connection
The device must be installed in a suitable housing protected against fi re and electrical or
mechanical infl uences.
Connect the power and Ethernet cables according to the following table
Terminals Description Voltage Range Remarks
V+, V-
24VDC
PWR IN
Power supply for modules and
sensors (A-ports via PWR Out
connectors)
18…30 V DC,
max. 4 A
Only use PWR connectors on one
side top OR bottom. Do not use
both at the same time.
L+, L-
PWR OUT
Port 1…8
Power supply (A-ports) for sen-
sors or actuators. Be aware of
the current limitations.
24 V DC,
max. 200 mA
If more current is needed for B-
port devices, take it directly from
the power supply.
Confi guration
Confi gure IP address
You can use the following procedure with the IO-Link master embedded web interface to
confi gure the AY1020 network settings (administrative rights required).
Note: The AY1020 is shipped from the factory with the Admin account enabled without a
password.
►Open browser and enter IP address of the AY1020.
Note: The AY1020 default IP address is 192.168.1.250. You may need to change your
laptop or PC network address to the same network segment to access the web interface.
►Click on [Confi guration] → [NETWORK].
►Click on the button [EDIT].
►Make any necessary network setting changes and click on [SAVE].
Connect and confi gure devices
►Connect the IO-Link and digital I/O devices
►Use the web interface to confi gure IO-Link, Ethernet/IP, and Modbus/TCP settings
– If necessary, confi gure the dedicated digital I/O ports.
– If desired, upload the appropriate IODD fi les for the IO-Link devices.
Operating instructions
IO-Link Master Ethernet/IP AY1020
– If desired, confi gure the IO-Link device parameters using the web interface.
– If desired, implement AY1020 features or options, such as: data storage mode, de-
vice validation mode, and data validation mode.
– Use the Diagnostics pages to monitor or troubleshoot the devices.
If desired, connect to a PLC or HMI/SCADA (depending on the protocol).
Electrical connection
A qualifi ed electrician must connect the unit. The national and international regulations for
the installation of electrical equipment must be adhered to.
Voltage supply to EN 50178, SELV, PELV or UL. The module must be supplied from only
one common voltage source.
The inputs and outputs are not electrically isolated.
►Disconnect power.
►Connect the device as follows; only one terminal block on the top or the bottom may be
connected.
Terminal connection top
1
LEDs
2
1: Terminal connection ext. voltage supply and IO-
Link ports 1,2,5,6
2: terminal connection and IO-Link ports 3,4,7,8
Ext. voltage supply
1: V_ext. voltage GND DC
2: V_ext. voltage GND DC
3: V_ext. voltage +24 V DC
4: V_ext. voltage +24 V DC
Terminal connection bottom
Internal voltage, inputs/outputs
1: L+ sensor supply +24 V DC
2: L- sensor supply GND DC
3: DI digital input DI
4: DO digital output DO
Terminal connection IO-Link ports
Ports 1…8
1: L+ sensor supply +24 V DC
2: L- sensor supply GND DC
3: DI digital input
4: C/Q IO-Link / DI / DO
IP address set at the factory: 192.168.1.250
7391053/00 02/2016 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen • Germany • http://www.ifm.com

Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: AY1020

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM AY1020 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret IFM Manualer

IFM

IFM EVCB25 Manual

1 Juli 2025
IFM

IFM EVCB17 Manual

24 Juni 2025
IFM

IFM EVCB28 Manual

24 Juni 2025
IFM

IFM EVCB07 Manual

24 Juni 2025
IFM

IFM EVCB22 Manual

23 Juni 2025
IFM

IFM EVCB13 Manual

23 Juni 2025
IFM

IFM EVCB12 Manual

23 Juni 2025
IFM

IFM EVCB23 Manual

23 Juni 2025
IFM

IFM EVCB08 Manual

23 Juni 2025
IFM

IFM EVCB24 Manual

23 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Racktime

Racktime Boost It 2.0 Manual

1 Juli 2025
Ikea

Ikea KNOPPÄNG 405.127.58 Manual

1 Juli 2025
Kogan

Kogan KASMDBLDCMA Manual

1 Juli 2025
Ikea

Ikea VALEVÅG 705.118.61 Manual

1 Juli 2025
Ikea

Ikea KALKKÄRR 505.910.76 Manual

1 Juli 2025
Busch-Jaeger

Busch-Jaeger 6737-803 Manual

1 Juli 2025
Ikea

Ikea VINGELEN 005.118.93 Manual

1 Juli 2025
Ikea

Ikea BAXNA 804.862.91 Manual

1 Juli 2025
Ikea

Ikea ÅNNELAND 104.817.44 Manual

1 Juli 2025
Ikea

Ikea TRIXIG 905.811.22 Manual

1 Juli 2025