IFM CR0200 Manual


Læs gratis den danske manual til IFM CR0200 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9 anmeldelser. Har du et spørgsmål om IFM CR0200, eller vil du spørge andre brugere om produktet?

Side 1/16
Mounting and installation
instructions
ExtendedController R 360
CR0200
ENGLISH
R
Sachnr. 7390427 / 02 09 / 2015
E CXTENDED ONTROLLER CR0200
PAGE 2
Safety instructions
This description is part of the unit. It contains texts and drawings
concerning the correct handling of the controller and must be
read before installation or use.
Observe the information of the description. Non-observance of the notes,
operation which is not in accordance with use as prescribed below, wrong
installation or handling can result in serious harm concerning the safety of
persons and plant.
The instructions are for authorised persons according to the EMC and low
voltage guidelines. The controllers must be installed and commissioned by a
skilled electrician (programmer or service technician).
If the unit is not supplied by the mobile on-board system (12/24 V battery
operation) it must be ensured that the external voltage is generated and sup-
plied according to the criteria for safety extra-low voltage (SELV) as this is sup-
plied without further measures to the connected controller, the sensors, and
the actuators.
The wiring of all signals in connection with the SELV circuit of the unit must
also comply with the SELV criteria (safe extra-low voltage, safe electrical sepa-
ration from other electric circuits).
If the supplied SELV voltage has an external connection to ground (SELV
becomes PELV) the responsibility lies with the user and the respective national
regulations for installation must be complied with. All statements in these
operating instructions refer to the unit the SELV voltage of which is not
grounded.
The terminals may only be supplied with the signals indicated in the technical
data or on the unit label and only the approved accessories of ifm electronic
gmbh may be connected.
The unit can be operated within a wide temperature range according to the
technical specification indicated below. Due to the additional self-heating the
housing walls can have high perceptible temperatures when touched in hot
environments.
In case of malfunctions or uncertainties please contact the manufacturer.
Tampering with the unit can lead to considerable risks for the safety of per-
sons and plant. It is not permitted and leads to the exclusion of any liability
and warranty claims.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: CR0200

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM CR0200 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM AL4032 Manual

8 Juni 2025
IFM

IFM AL4132 Manual

8 Juni 2025
IFM

IFM AL4133 Manual

7 Juni 2025
IFM

IFM AL4033 Manual

6 Juni 2025
IFM

IFM DW3003 Manual

9 April 2025
IFM

IFM IG6084 Manual

13 Marts 2025
IFM

IFM PV2102 Manual

10 Marts 2025
IFM

IFM OVP812 Manual

25 Januar 2025
IFM

IFM AE3400 Manual

25 Januar 2025
IFM

IFM DTE932 Manual

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer