IFM DI003A Manual

IFM Ikke kategoriseret DI003A

Læs gratis den danske manual til IFM DI003A (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4 anmeldelser. Har du et spørgsmål om IFM DI003A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

706177 / 00 04 / 2014

Operating instructions

(Ex protection related part) for inductive sensors

according to EU directive 94/9/EC Annex VIII (ATEX)

group II, equipment category 3D

DI003A, DI004A

DI504A, DI505A, DI506A

UKUK

Operating instructions (safety-related part ATEX)

Remarks for safe use in

hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

The requirements of the standards EN60079-0 and EN60079-31 are met.

• Marking (see unit or technical data sheet)

II 3D Ex tc IIIC T80°C Dc IP67 U

• Permissible operating temperature of the application (proper usage):

Ta: -20°C...+50°C

Installation / set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see "Marking" above and marking on the unit) is suitable

for the application.

Installation remarks / installation

• Adhere to the respective national regulations and provisions as well as the relevant

installation regulations.

• Avoid electrostatic charging on plastic units and cables.

• To avoid electrostatic charging clean the unit with a damp cloth only.

Rubbing with non-conductive materials must be strictly avoided.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, protective housing, etc.).

• Do not mount the unit in the dust flow.

• Avoid dust deposits on the units.

• Protect the units and the cables efficiently against damage.

• For the connections and the electrical characteristics please see the unit marking or the

technical data sheet.

• Avoid soiling of the connector area. Attach the socket in a clean environment.

• Avoid direct radiation with high UV components (sunlight).

Mount the unit in a protected place.

• M12 plugs may only be opened or closed in a sufficiently clean environment.

Produkt Specifikationer

Mærke:	IFM
Kategori:	Ikke kategoriseret
Model:	DI003A

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM DI003A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFM Manualer

8 September 2025

29 August 2025

29 August 2025

28 August 2025

28 August 2025

28 August 2025

27 August 2025

25 August 2025

22 August 2025

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ibm System Storage N6220 Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025