IFM E12522 Manual


Læs gratis den danske manual til IFM E12522 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4 anmeldelser. Har du et spørgsmål om IFM E12522, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation instructions
Mounting set
E125xx
80257071/00 08/2016
UK
2
Installation
Preparation for installation
Drill a hole into the centre of the manual
valve in the direction of the arrow, to fit
the shaft extension as shown (1).
Tap the hole.
Shorten extension to the length
required.
1
Attach the supplied lock nut and screw
into the valve (1).
Mount the angled lower part to the
valve (2).
1
2
Fix the upper part to the lower part
using the M6 x 10 screws, using the
serrated washer.
Adjust the height position to fasten the
upper part. This can be done in steps of
10 mm (3 and 4).
Adjust the shaft to the height of the
upper bridge part, then turn the self-
locking nut downward to fix the hand
lever (5).
3
4
5


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E12522

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E12522 stil et spørgsmål nedenfor, og andre brugere vil svare dig