IFM E30060 Manual


Læs nedenfor 📖 manual på dansk for IFM E30060 (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 9 personer og blev bedømt med 4.9 stjerner i gennemsnit af 5 brugere

Side 1/3
Installation Instructions
Welding adapter
G1 / G¾
706013/02 08/2017
UK
UK
UK
UK
UK
2
A
BB
1 2
A: Groove for the O-ring (E30072 only); B: Marking for alignment
Order no. Type Material Pressure rating *
E30009 G¾ - Ø 50mm stainless steel (316S12) 25 bar
E30013 G1 - Ø 50mm stainless steel (316S12) 150 bar
E30060 G1 - Ø 50mm steel (1.0570) 50 bar
E30072 G1 - Ø 50mm stainless steel (316S12) 150 bar
* for the connection sensor - adapter
E30072 is supplied with a Viton O-ring and an EPDM O-ring
Note
The welding operation must be carried out by authorised personnel.
It must be carried out carefully and according to state-of-the-art technology.
During welding and the following cooling phase, neither sensor nor O-ring must
be in place.
The surfaces must be free from soiling of any kind.
Welding tools must be suitable for the adapter and wall material.
Preparations
Bore a hole in the pipe or housing wall with the outside diameter of the adapter
(max. oversize: 0.2 mm).
If possible, screw a welding mandrel into the adapter
(order no. E30435 for G1 thread, order no. E30071 for G3/4 thread).


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E30060

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E30060 stil et spørgsmål nedenfor, og andre brugere vil svare dig