IFM E30108 Manual


Læs gratis den danske manual til IFM E30108 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om IFM E30108, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation Instructions
Welding adapter
E30108
704097 / 00 11 / 2014
UK
2
Installation







1. Weld in the adapter.
The adapter should only be welded by qualified personnel.
Use a welding method which is suitable for the material (stainless
steel, material no. 316S12).
Make sure that the adapter does not warp.
Let the adapter cool down.
2. Grease the following parts: nut (1), clamping ring (2), thread and inner hole of
the adapter (3).
3. Position the clamping ring.
Chamfered end (4) into the adapter.
4. Screw in the nut.
5. Position the sensor (5).
6. Tighten the nut manually and mark its position with a line (6).
7. Adjust the sensor to the required installation depth. Hold it and tighten the nut
by 1 full turn with a tool.
Repeated mounting
You can remove the sensor e.g. to clean the tip. Then insert the sensor again and
firmly tighten the nut.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E30108

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E30108 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM AL4032 Manual

8 Juni 2025
IFM

IFM AL4132 Manual

8 Juni 2025
IFM

IFM AL4133 Manual

7 Juni 2025
IFM

IFM AL4033 Manual

6 Juni 2025
IFM

IFM DW3003 Manual

9 April 2025
IFM

IFM IG6084 Manual

13 Marts 2025
IFM

IFM PV2102 Manual

10 Marts 2025
IFM

IFM OVP812 Manual

25 Januar 2025
IFM

IFM AE3400 Manual

25 Januar 2025
IFM

IFM DTE932 Manual

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer