IFM E30131 Manual


Læs gratis den danske manual til IFM E30131 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om IFM E30131, eller vil du spørge andre brugere om produktet?

Side 1/2
Installation Instructions
Adapter
E30131
706005/00 05/2011
UK
ifm electronic gmbh • Friedrichstr. 1 • 45128 Essen • Germany
http://www.ifm.com • e-mail: info@ifm.com
2
Mounting sensor - adapter
D
A
B
C
1 2 3
Slightly grease the threads and sealing areas of the sensor and adapter with
the lubricating paste (A).
The paste must be suitable and approved for the application and compatible
with the elastomers used.
Place the sealing ring (B) in the groove (C) of the sensor.
The adapter is supplied with an EPDM O-ring. More sealing rings are available
as accessories: FKM O-ring, order no. E30123.
Screw the sensor into the adapter until it is hand-tight.
Clamp the sensor + adapter into a clamping device (D). Tighten the clamping
device only slightly so that the adapter does not warp.
Tighten the sensor using a spanner until you can feel the end stop (this cor-
responds to a maximum tightening torque of 35 Nm). Note: Further tightening
may affect the sealing effect.
Technical data and further information at www.ifm.com


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E30131

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E30131 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM AL4032 Manual

8 Juni 2025
IFM

IFM AL4132 Manual

8 Juni 2025
IFM

IFM AL4133 Manual

7 Juni 2025
IFM

IFM AL4033 Manual

6 Juni 2025
IFM

IFM DW3003 Manual

9 April 2025
IFM

IFM IG6084 Manual

13 Marts 2025
IFM

IFM PV2102 Manual

10 Marts 2025
IFM

IFM OVP812 Manual

25 Januar 2025
IFM

IFM AE3400 Manual

25 Januar 2025
IFM

IFM DTE932 Manual

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer