IFM E33304 Manual


Læs gratis den danske manual til IFM E33304 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18 anmeldelser. Har du et spørgsmål om IFM E33304, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation instructions
Aseptoflex Vario adapter
with O-ring / PEEK sealing ring
E332xx
E333xx
704965/01 02/2011
UK
2
1 Installation sensor - adapter
C
B
A
Grease the sensor thread with
paste (A).
The paste must be suitable and ap-
proved for the application and com-
patible with the elastomers used.
Place the sealing ring (B) in the
groove (C) of the sensor.
Screw the sensor into the adapter
until it is hand-tight. When doing
so, avoid mechanical effects on the
sealing areas, the hygienic area and
the pressure measuring cell.
D
Clamp the sensor + adapter into a
clamping device (D). Tighten the
clamping device only slightly so that
the adapter does not warp.
Tighten the sensor using a spanner
until you can feel the end stop (this
corresponds to a maximum tighten-
ing torque of 35 Nm). Note: Further
tightening may affect the sealing
effect.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E33304

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E33304 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM AL4032 Manual

8 Juni 2025
IFM

IFM AL4132 Manual

8 Juni 2025
IFM

IFM AL4133 Manual

7 Juni 2025
IFM

IFM AL4033 Manual

6 Juni 2025
IFM

IFM DW3003 Manual

9 April 2025
IFM

IFM IG6084 Manual

13 Marts 2025
IFM

IFM PV2102 Manual

10 Marts 2025
IFM

IFM OVP812 Manual

25 Januar 2025
IFM

IFM AE3400 Manual

25 Januar 2025
IFM

IFM DTE932 Manual

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer