IFM E33602 Manual


Læs gratis den danske manual til IFM E33602 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om IFM E33602, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation instructions
Clamp adapter 1-1.5‘
for sensors with G1 male sealing cone
E33602
80255099 / 00 01/ 2017
UK
UK
UK
UKUK
UK
2
1 Functions and features
The clamp adapter 1-1.5" can be used together with O-ring sealing and leakage
port for applications under hygienic conditions to 3A.
Clamps and clamp seals are usually designed for a pressure level of PN16.
At plant pressures above this pressure level:
► →Adapt accessories ( 3 Foreseeable misuse)
2 Installation procedure
2.1 Sensor – adapter
B
A
C
Lightly grease the thread of the sensor
using a lubricating paste (A).
The paste must be suitable and
approved for the respective application.
Place the sealing ring (B) in the groove
(C) of the adapter.
If necessary, check O-rings and
lubricating paste for the application
requirements and adapt.
Screw the sensor into the adapter until
it is hand-tight. When doing so, avoid
mechanical effects on the sealing
areas, the hygienic area and the
pressure measuring cell.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E33602

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E33602 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM CR1141 Manual

10 August 2025
IFM

IFM EVCA40 Manual

10 August 2025
IFM

IFM UGT527 Manual

10 August 2025
IFM

IFM EVCA24 Manual

10 August 2025
IFM

IFM EVCA15 Manual

10 August 2025
IFM

IFM EVCA00 Manual

9 August 2025
IFM

IFM EVCA31 Manual

9 August 2025
IFM

IFM LX0041 Manual

9 August 2025
IFM

IFM E30541 Manual

9 August 2025
IFM

IFM EVCA27 Manual

9 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer