IFM E70600 Manual


Læs gratis den danske manual til IFM E70600 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5 anmeldelser. Har du et spørgsmål om IFM E70600, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation instructions
Quad M12
E70588
Quad
E70600
7390873/00 03/2014
UK
2
1 Functions and features
The Quad module is used to open an AS-i spur or for additional voltage supply
(current rating 8 A).
With the Quad M12 module the AS-i voltage and external voltage can be
tapped via the M12 socket (current rating 4 A).
Pin connection of the M12 socket:
3
1 2
4
5
pin 1 AS-i +
pin 2 0 V
pin 3 AS-i -
pin 4 + 24 V
pin 5 functional earth
2 Installation
Disconnect power.
2.1 Installation of the lower part
Choose a plane mounting
surface. The entire bottom of
the module must lie flat on the
mounting surface.
Screw the lower part onto the
mounting surface. To do so,
use the mounting holes (1)
and M4 mounting screws with
washers M4 (not supplied with
the device). Tightening torque
2.3...2.5 Nm.
LINE 1
LINE 2
Place the profile seals (3) into the slots (2) of the module lower part. If
the module is at the end of the cable run, the blanking seals (4) must
be used to ensure the IP 65 protection rating.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: E70600

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM E70600 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret IFM Manualer

IFM

IFM AL4032 Manual

8 Juni 2025
IFM

IFM AL4132 Manual

8 Juni 2025
IFM

IFM AL4133 Manual

7 Juni 2025
IFM

IFM AL4033 Manual

6 Juni 2025
IFM

IFM DW3003 Manual

9 April 2025
IFM

IFM IG6084 Manual

13 Marts 2025
IFM

IFM PV2102 Manual

10 Marts 2025
IFM

IFM OVP812 Manual

25 Januar 2025
IFM

IFM AE3400 Manual

25 Januar 2025
IFM

IFM DTE932 Manual

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer