IFM IG010A Manual

IFM Ikke kategoriseret IG010A

Læs gratis den danske manual til IFM IG010A (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om IFM IG010A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

704491 / 01 09 / 2010

Operating instructions

(Ex protection related part) for inductive sensors and speed monitors

according to EU directive 94/9/EC annex VIII (ATEX) group II, equipment

category 3D

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

The requirements of the standards EN 61241-1 and EN 61241-0 are met.

Shock test to EN 60947-5-2 with 0.5 joules.

• Marking (see unit or technical data sheet)

II 3D Ex tD A22 IP67 T80°C X Ta: 0°C...+60°C

II 3D Ex tD A22 IP67 T80°C X Ta: -20°C...+60°C

II 3D Ex tD A22 IP65 T80°C X Ta: -20°C...+60°C

II 3D Ex tD A22 IP54 T80°C X Ta: -20°C...+60°C

II 3D Ex tD A22 IP67 T90°C X Ta: -20°C...+60°C

II 3D Ex tD A22 IP54 T95°C X Ta: -20°C...+60°C

• Permissible operating temperature of the application (proper usage):

Ta: -20°C...+60°C or Ta: 0°C...+60°C

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see "Marking" above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the respective national regulations and provisions as well as the relevant

installation regulations.

• Avoid electrostatic charging on plastic units and cables.

• To avoid electrostatic charging clean the unit with a damp cloth only. Rubbing with non-

conductive materials must be strictly avoided.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, protective housing, etc.).

• Do not mount the unit in the dust flow.

• Avoid dust deposits on the units.

• Protect the units and the cables efficiently against damage.

Produkt Specifikationer

Mærke:	IFM
Kategori:	Ikke kategoriseret
Model:	IG010A

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM IG010A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFM Manualer

8 September 2025

29 August 2025

29 August 2025

28 August 2025

28 August 2025

28 August 2025

27 August 2025

25 August 2025

22 August 2025

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Avanti FF1013D3S Manual

13 September 2025

Anybus ProfiHub B2FO2+ Manual

13 September 2025

Liebherr CNsdh 762i Manual

12 September 2025

Urbanista Palo Alto Manual

12 September 2025

Autel MaxiSYS MS908S Pro Manual

12 September 2025

Parisot Biotiful 2273A3PT Manual

12 September 2025

Ibm System Storage N6220 Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025