IFM IM002A Manual

IFM Ikke kategoriseret IM002A

Læs gratis den danske manual til IFM IM002A (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om IFM IM002A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operating instructions

(Ex protection related part)

Inductive sensors

IM5**A / IM0**A

80297015 / 00 09 / 2020

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

Complies with the requirements of the standards EN 60079-0 and EN 60079-31.

• Certificat d‘examen de type:

BVS 20 ATEX E 056 X

• Certificat d‘examen IECEx de type:

IECEx BVS 20.0043X

• Marking

II 3D Ex tc IIIC T95°C Dc X

• Permissible operating temperature of the application (proper usage):

Ta: -20°C...+60°C

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see “Marking” above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the relevant national regulations and provisions.

• The relevant installation regulations must be adhered to. In particular, take into account the

requirements relating to the temperature limitation as regards the expected dust deposits.

• Avoid electrostatic charging on housings and cables.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, etc.).

• Protect the units and the cables efficiently against damage.

• To avoid soiling, do not remove the dust caps from the cable glands or the plugs until

introducing the cables or attaching the socket.

• If the sensing direction is altered, ensure that the locking screw is securely tightened.

• When the terminal chamber is closed, ensure that the securing element is correctly locked

in and is flush with the housing.

• When replacing the cable gland, ensure a tight fit of the cable gland as well as the cover

plug.

• It is the responsibility of the user to determine the appropriate tightening torques for the

type of cable used. The cable glands and the cap nut have to be firmly tightened. If the

Produkt Specifikationer

Mærke:	IFM
Kategori:	Ikke kategoriseret
Model:	IM002A

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM IM002A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFM Manualer

8 September 2025

29 August 2025

29 August 2025

28 August 2025

28 August 2025

28 August 2025

27 August 2025

25 August 2025

22 August 2025

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025

DAP-Audio DCP-26 MKII Manual

12 September 2025

Vivax MF-45E Manual

12 September 2025