IFM IM5016 Manual


Læs gratis den danske manual til IFM IM5016 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om IFM IM5016, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation Instructions
Inductive sensor
IME non flush
704288 / 00 09 / 2007
UK
UK
UK
UK
UK
2
Function and features
This sensor detects metals without contact and indicates their presence by provi-
ding a switched signal. The nominal sensing range (Sn) can be seen in the type
designation on the type label on the unit; operating distance (Sa) 0 ... 0,81 x Sn;
(values based on standard measurement with mild steel; a shorter sensing range
for other metals).
Installation
Screw the proximity switch to a firm
base. If there is high mechanical stress,
ensure that it cannot work loose (fig. 1).
Non-flush installation.
Open space in front of the sensing
face when mounted in metal: fig. 2
and 3.
Minimum distance when several
sensors of the same type are
mounted: fig. 4 and 5.
9mm
3 x Sna2 x a2 x a
8 x Sn
2 x aa a
2 3
4 5
1


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: IM5016

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM IM5016 stil et spørgsmål nedenfor, og andre brugere vil svare dig