IFM IM5022 Manual


Læs gratis den danske manual til IFM IM5022 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om IFM IM5022, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation Instructions
Inductive sensor
IME ush
704287 / 00 09 / 2007
UK
UK
UK
UK
UK
2
Function and features
This sensor detects metals without contact and indicates their presence by provi-
ding a switched signal. The nominal sensing range (Sn) can be seen in the type
designation on the type label on the unit; operating distance (Sa) 0 ... 0,81 x Sn;
(values based on standard measurement with mild steel; a shorter sensing range
for other metals).
Installation
Screw the proximity switch to a rm
base. If there is high mechanical stress,
ensure that it cannot work loose.
Flush mountable (g. 1 and 2).
When mounted in metal, the metal must
not protrude over the sensing face.
Open space in front of the sensing
face when mounted in metal: g. 3.
Minimum distance when several
sensors of the same type are
mounted: g. 4 and 5.
9mm
3 x Sn
8 x Sn
a aa
2 3
4 5
1


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: IM5022

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM IM5022 stil et spørgsmål nedenfor, og andre brugere vil svare dig