IFM IM511A Manual

IFM Ikke kategoriseret IM511A

Læs gratis den danske manual til IFM IM511A (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om IFM IM511A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operating instructions

(Ex protection related part)

Inductive sensors

IM5**A / IM0**A

80297016 / 00 09 / 2020

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

Complies with the requirements of the standards EN 60079-0 and EN 60079-31.

• Use in hazardous areas according to the classification

II 3G

(group II, category 3G, apparatus for gas atmosphere).

The requirements of the standard EN 60079-15 are met.

• Certificat d‘examen de type:

BVS 20 ATEX E 057 X

• Certificat d‘examen IECEx de type:

IECEx BVS 20.0044X

• Marking

II 3D Ex tc IIIC T95°C Dc X

II 3G Ex nA IIC T4 Gc X

• Permissible operating temperature of the application (proper usage):

Ta: -20°C...+60°C

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see “Marking” above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the relevant national regulations and provisions.

• The relevant installation regulations must be adhered to. In particular, take into account the

requirements relating to the temperature limitation as regards the expected dust deposits.

• Avoid electrostatic charging on housings and cables.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, etc.).

• Protect the units and the cables efficiently against damage.

• To avoid soiling, do not remove the dust caps from the cable glands or the plugs until

introducing the cables or attaching the socket.

• If the sensing direction is altered, ensure that the locking screw is securely tightened.

Produkt Specifikationer

Mærke:	IFM
Kategori:	Ikke kategoriseret
Model:	IM511A

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM IM511A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFM Manualer

8 September 2025

29 August 2025

29 August 2025

28 August 2025

28 August 2025

28 August 2025

27 August 2025

25 August 2025

22 August 2025

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Avanti FF1013D3S Manual

13 September 2025

Anybus ProfiHub B2FO2+ Manual

13 September 2025

Liebherr CNsdh 762i Manual

12 September 2025

Urbanista Palo Alto Manual

12 September 2025

Autel MaxiSYS MS908S Pro Manual

12 September 2025

Parisot Biotiful 2273A3PT Manual

12 September 2025

Ibm System Storage N6220 Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025