IFM IN0100 Manual

IFM Ikke kategoriseret IN0100

Læs gratis den danske manual til IFM IN0100 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om IFM IN0100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen • Germany • http://www.ifm.com • e-mail:info@ifm.com

80011313 / 00 05 / 2014

Mounting Instructions

IND Series Proximity Switches / CSA Div. 2

The IND proximity switch is used for reliable indication of rotary

valve position. A “target puck” is mounted on the valve actuator

shaft. When the valve is opened or closed, the target puck rotates

90° positioning a screw head within the sensing range of one of the

proximity switches. The switched output is used to provide feedback

on the position of the rotary valve.

sensors

target

efector IND series

proximity switch

Target puck

Simple Operation

The Model IND has two proximity switches in a compact sealed

housing . . .

. . . and detects two metallic screws located 90°apart at two different

heights in a target puck mounted on the actuator shaft.

Target

Installation

The IND proximity switch mounts directly in the holes normally used

to attach a standard switchbox bracket to an actuator. The puck is

placed on the actuator shaft and is keyed for alignment. Position

the target puck so that the metallic screw heads will activate either

proximity switch when the valve is opened or closed.

When the valve is open, one of the screws is directly in front of the

sensor and you receive a positive valve open signal. In this case,

the screw is in the top position to indicate normally open.

A1 LED = on

A2 LED = off

Close the valve and the other screw moves into position for a posi-

tive valve closed signal.

A1 LED = off

A2 LED = on

CSA for Hazardous Locations

When wired in accordance with CEC and this mounting instructions.

Class I, Div. 2, Groups A, B, C and D

Class II, Div. 2, Groups E, F and G

Class III, T4

Enclosure: Type 4/4x

Temp. range: -13° to 176°F (-25° to 80°C)

ELECTRICAL

DO NOT operate an incandescent light bulb as a load.

The current inrush when the bulb is cold can cause a

current overload.

DO NOT operate a proximity sensor directly from a

voltage supply without a load. This is a short circuit and

can cause damage. Note: insert a miniature fuse accor-

ding to the technical data sheet, if specified.

Concerning Safety... ifm efector makes every effort to build a de-

pendable product, but every product will eventually fail. Therefore,

your equipment must be designed to prevent property damage

and personal injury if our products fail. ifm efector proximity

switches are not designed to be used as stand-alone devices to

protect or guard human life or limb.

WARNING

Explosion Hazard – substitution of components may impair suitability

of Class 1, Div. 2. Do not disconnect while circuit is live unless area is

known to be non-hazardous.

AVERTISSEMENT

Risque d'explosion - La Substitution de composants peut rendre ce

matérielle inacceptable pour les emplacements de classe I division 2.

Ne pas débrancher tant que le circuit est sous tensions, à moins qu'il

ne s'agisse d'un emplacement non dangereux.

CAUTION

Use only ifm efector conduit adapters (U30029, U30030, U30031) or

other CSA ceritifed conduit adapters.

ATTENTION

Utiliser uniquement les adaptateurs tube d'ifm efector (U30029,

U30030, U30031) ou d'autres adaptateurs tube certifiés par CSA.

Produkt Specifikationer

Mærke:	IFM
Kategori:	Ikke kategoriseret
Model:	IN0100

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM IN0100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFM Manualer

15 Oktober 2025

15 Oktober 2025

14 September 2025

13 September 2025

13 September 2025

13 September 2025

13 September 2025

8 September 2025

29 August 2025

29 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Dahua Technology HAC-HFW1230S-POC Manual

28 Oktober 2025

Dahua Technology HAC-HDW1400TLMQ-A Manual

28 Oktober 2025

Dahua Technology EVS7124D Manual

27 Oktober 2025

Dahua Technology XVR7816S-4KL-X-LP Manual

27 Oktober 2025

Dahua Technology HAC-HDW1220EM Manual

27 Oktober 2025

Dahua Technology ISC-M6550 Manual

27 Oktober 2025

Dahua Technology EVS7148D Manual

27 Oktober 2025

Dahua Technology HAC-HFW2249E-A Manual

27 Oktober 2025

Dahua Technology XVR5108/16H-X Manual

27 Oktober 2025

Dahua Technology XVR5108HE-4KL-I2 Manual

27 Oktober 2025