IFM IN507A Manual

IFM Ikke kategoriseret IN507A

Læs gratis den danske manual til IFM IN507A (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om IFM IN507A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operating instructions

(Ex protection related part) for inductive sensors

according to EU directive 2014/34/EU annex VIII (ATEX)

group II, equipment category 3D/3G

IN507A

704238 / 01 01 / 2017

Remarks for safe use in hazardous areas

Functions and features

• Use in hazardous areas according to the classification

II 3D

(group II, category 3D, apparatus for dust atmosphere).

The requirements of the standards EN 60079-0 and EN 60079-31 are met.

• Use in hazardous areas according to the classification

II 3G

(group II, category 3G, apparatus for gas atmosphere).

The requirements of the EN 60079-15 standard are met.

• Marking (see unit or technical data sheet):

II 3D Ex tc IIIC T80°C Dc IP67 X

II 3G Ex nA IIC T6 Gc X

• Permissible ambient temperature of the application (proper usage) (see unit or technical

data sheet):

-20°C 60°C≤ Ta ≤

Installation / Set-up

The units must only be installed, connected and set up by qualified staff. The qualified staff

must have knowledge of protection classes, regulations and provisions for apparatus in

hazardous areas.

Check whether the classification (see "Marking" above and marking on the unit) is suitable

for the application.

Installation remarks / Installation

• Adhere to the respective national regulations and provisions as well as the relevant

installation regulations.

• Avoid electrostatic charging on plastic units and cables.

• To avoid electrostatic charging clean the unit with a damp cloth only.

• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential

of metal parts (plug housing, fixing elements, protective housing, etc.).

• Do not mount the unit in the dust flow.

• Avoid dust deposits on the units.

• Protect the units and the cables efficiently against damage.

• For the connections and the electrical characteristics please see the unit marking or the

technical data sheet.

• To avoid soiling, do not remove the connector cover until attaching the socket.

• Protect the unit (plastic parts) from UV light.

Special conditions for safe operation

• The unit (1) must only be installed in conjunction with the supplied protective housing (2).

• Use the supplied mounting plate (4) to ensure a secure fit of the mounting screws (5).

Produkt Specifikationer

Mærke:	IFM
Kategori:	Ikke kategoriseret
Model:	IN507A

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM IN507A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret IFM Manualer

8 Juni 2025

8 Juni 2025

7 Juni 2025

6 Juni 2025

9 April 2025

13 Marts 2025

10 Marts 2025

25 Januar 2025

25 Januar 2025

25 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rival FRRVSC500 Manual

14 Juni 2025

Marshall AR-DM61-BT Manual

14 Juni 2025

Berkel Suprema Salumeria PES315 Manual

14 Juni 2025

Levenhuk LabZZ F1 Manual

14 Juni 2025

AVM FRITZ!Smart Energy 200 Manual

14 Juni 2025

Aiphone AC-2DM-B Manual

14 Juni 2025

Levenhuk LabZZ FL5 Manual

14 Juni 2025

Mountfield Multiclip 501HP Manual

14 Juni 2025

Bopita Universal Manual

14 Juni 2025

ENTES GEMO-10-4G Manual

14 Juni 2025